Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

eXtremeRate Soft Touch Black Joycon Handheld Controller Housing (D-Pad Version) with Full Set Buttons, DIY Replacement Shell Case for Nintendo Switch & Switch Oled Joy-Con – Console Shell NOT Included | Envi

Nate
The best aftermarket Joy-con Shells hands down!
This was one of the coolest projects I have embarked upon recently. I would say the difficulty of swapping out your joycon's shell is somewhat moderate but actually easier than expected If you have taken apart any electronics in the past this should be fairly straight forward there were a couple of tough spots but overall I would definitely do this mod again!The actual disassembly process can be a bit daunting but a couple of notes first off you only have to actually detach two ribbon cables and those are the cables connected to the ZL and ZR buttons because those buttons are connected to this inner piece that you should probably replace to reflect the included piece and not the color of your joycons - because if you had say red joycons and were replacing with a white shell then this middle piece would show red a little - most of the color variants i saw show the shells with a black inner shell and while I would have been nice to fully match the color scheme it still matches the shoulder buttons colors so it works well.The biggest trouble spots for me were when detaching the ribbon cables of the ZL and ZR button and actually removing the buttons from the old housing - they have these tiny springs and if your not careful these will go flying off into the either never to be found again. I actually lost two springs this way but luckily extreme rate thought of this and include additional springs for that very reason but my suggestion would be when you get to removing and re-installing the ZL and ZR button do so in a clear bag so you can see your work but also you can contain the springs because they most definitely will fly everywhere.The Right Joycon was also more difficult then the left and I would suggest starting on the Left because the Right has a lot more components to fiddle with but overall this was a really fun project and I learned a ton and the actually new shell from ExtremeRate is fanstansic it feels just like the stock joycons and looks extremely cool. I'm so impressed by their quality.A little side note about the D-pad While I will say I love that I did the dpad one these are not a PERFECT dpad replacement because essentially the way a traditional dpad works is that it has a pin in the center of the dpad that it swivels on giving you a bit of play where as these are just a direct connection to what used to be buttons it feels great and solid but its a bit of a different feel - very clicky.Overall if your interested in getting really cool colors for your joycons i would HIGHLY recommend going with ExtremeRate avoid those other competitors as Their quality is much less impressive and the results are worse. The only last thing I would suggest is get yourself a tweezers for being able to manipulate some small bits and maybe a spudger to pry off parts that are stuck down etc. GOOD LUCK!Ver másVer menos
8 personas la encontraron útil
Shane Hawke
Matte Black Switch OLED
ExtremeRate never disappoints with the looks, I re-shelled my DS Lite with one of their kits and it looks amazing Aswell. I am very meticulous and also installed Hall Effect Joysticks, so these Joycons took me about 3 hours total. I recommend watching the tutorial by FetchingTech on YouTube, as it's a bit more thorough than the one by ExtremeRate. The added "D-Pad" feels MUCH better than stock, huge upgrade alone.My only slight dislike was the included buttons looked and felt a bit cheap, and the kit doesn't include any sticky tape for the battery and rumble motor, so you have to try and salvage the ones off the old housing if you don't want to risk loose internals. Overall, still highly recommend!Ver másVer menos
Don K
8 de junio de 2026
Great for Budget Customization
I buy a fair amount of eXtremeRate products. I like to customize my controllers. These are high quality and perfectly compatible. The tools they send will work and I’ve used them before, but I do tend to use my own tools. Color consistency is amazing, I have matched multiple consoles for my girlfriend. If you work on electronics, these are super easy to install, if you are a beginner, watch the videos and make sure you have a clean and clear workspace.Ver másVer menos
Matthew H Donovan
After 5 months, still happy with shells - with some nitpicks
5 months ago, I picked up the "Joycon Shell and Buttons - Dpad Version" in the "JZ_Scarlet Red" color. I picked this up because I wanted the classic-style D-pad, and this was the best option. It does VERY well at this - it feels very good on my thumb and I'm never pressing the wrong buttons (unlike with the separate four-button D-pad). I'm very happy with these shells and would recommend - but here are some nitpicks for your consideration.The major nitpick which other people will mention is about the construction/installation. You need to be comfortable disassembling and reassembling your joy-cons for this. The video instructions help a lot, but you will need to plan on starting/stopping it a lot (and mute, because the background music is obnoxious). This will take 1-2 hours.The medium nitpick is about durability. Over time, attaching and removing the joy-cons has left the white marks on the inside (next to the black runners). Apparently the coloring must be a paint layer rather than a solid casting, so it seems to have chipped off. These are invisible when attached to the Switch, so it's not a dealbreaker, but an annoyance.The minor nitpick is about the material finish. The JZ_Scarlet Red (and I'm guessing some of the other metallic looking colors) have a satin finish, so the color is usually a bit dull. However, whenever oil from your hands gets on the material, it has a nice metallic look to it. Because of this, fingerprints show up very clearly on the shell. This is a bit hard to capture on camera, but I tried to catch an angle on the second picture. The satin texture itself feel nice in the hand.I bought these shells primarily so I could get the cross-shaped D-Pad, and secondarily for aesthetic concerns. Highly recommend for the D-pad, but you'll have to weigh the chipping and fingerprint issues for yourself.Ver másVer menos
1 persona la encontró útil
MR
high risk, high reward
five stars: the product is great. i love the soft touch matte texture and the color. i've only had them on for about 24 hours, so i can't say much about the durability; however, i typically use a clear TPU case by findway on amazon, so hopefully that will prevent unnecessary scratches and paint degradation. everything fit perfectly without the need for filing or any other adjustments. this kit comes with black buttons, and no extra joysticks. the white buttons i used are sold by extremerate, and the white joysticks are sold by starko (also here on amazon).this is not an easy plug-and-play mod. there are a lot of internal parts in these little controllers. you will need good lighting, a good set of tweezers (not included with tools), and a lot of patience. i'm a person who does not mess with electronics. i've never done anything like this before. it was doable, but far from simple. watch youtube videos before starting, AND during the process. be prepared to mess up if you're a newbie like me; if you can't afford another set of joycons just in case, don't buy. if you don't have the patience to open it back up to find the problem when you find that something isn't working, don't buy.i actually messed up my right joycon - absolutely no fault of extremerate - and now it won't hold a charge or work wirelessly, and either have to deal with it or get a new right joycon. this is just so you understand what you may be getting in to.the labor you put in is worth how beautiful your joycons will look when you're done. be careful.Ver másVer menos
23 personas la encontraron útil
Christian
So its nice to look at, I’ll give it that
So there’s alot of small issues with this shell replacement. Lets start with the most obvious thing when first feeling these shell replacements; the plastic is lower quality, which sounds minuscule or expected of an off brand product but where the issue lies is in the spots where a screw needs to go into the plastic. Most of the time, the screws won’t go in properly or they’ll just not go into the plastic too well and fall right out. Internally this isn’t too much of an issue but where i ran into this issue the most was the outside screws that hold the 2 sides of the shell together. Firstly, since the plastic is more flimsy than stock joycons you can easily screw through the plastic where the screws go in. Unlike the stock joycon shell which eventually doesn’t let you screw any deeper, this one kind of just breaks. Once that happens you are screwed (haha) because the plastic shell replacements won’t hold together proper and won’t sit flush with the rails. My advice is be even more delicate with this shell than you are with the stock ones, cheap plastic breaks and blemishes so much more easily. I saved one screw hole by using a bigger screw, but the other i hade to use contact cement and a small screw to keep the shell together, and its not as flush as a stock joycon.UPDATE: i contacted the seller on Twitter and they are willing to replace the joycon shells for free. I changed my review from a 2 star to a 5 star. Thats really good customer serviceVer másVer menos

Ver más reseñas

Otras opciones

eXtremeRate Soft Touch Black Joycon Handheld Controller Housing (D-Pad Version) with Full Set Buttons, DIY Replacement Shell Case for Nintendo Switch & Switch Oled Joy-Con – Console Shell NOT Included

Reseñas

Sobre este producto

The best aftermarket Joy-con Shells hands down!

Matte Black Switch OLED

Great for Budget Customization

After 5 months, still happy with shells - with some nitpicks

high risk, high reward

So its nice to look at, I’ll give it that

También te puede interesar

También te puede interesar