JeepRocks
2 de diciembre de 2021
Good product but read this before buying - JKU 2013
I can tell you factually that this device will program for the 2013 and 2015 Jeep Wrangler. For programing, go to this forum and search for a post by JeepRocks (me). The post includes a video by o3djeeps (CPO), and at minute 5:57 he walks you through the unbelievably simple programming process. 1-put first original key in, turn to the "ON" position (not running) for 3 seconds (no more than 5 seconds) shut it off, remove key #1 2-put second original key in and turn to "ON". Leave key in until security light starts to floash - about 10 seconds (on dash, lower right hand corner-you can't miss it) 3-remove key #2, put new key in, turn to "ON" for about 5 seconds, then move to "RUN" to start the car. When finished, ensure lock/unlock/;panic work. If you only have 1 key, you should download an app called "OBD2 JSCAN" and follow the instructions elsewhere in this review list. NOTE: This is a fairly large fob (I like) and normal key making machines cannot handle it. You can take the fob apart and remove the blade which the keymaker can then strike for you. If you are not used to disassembling and reassembling small things, DO NOT EVEN TRY TO DO THIS. The blade spring WILL unwind on you. It is not particularly hard to take this apart (use knife to remove back then do what comes natural). All of the complexity is in the silver button/spring mechanism. It's very straight forward and very sturdy. I used 2 turns of the spring to emulate the original strength of the blade release. Again, if you are not used to taking small things apart DO NOT DO THIS. It took me 5 minutes to carefully disassemble and 5 minutes to reassemble. You do not have to remove the 2032 battery.Ver másVer menos
14 personas la encontraron útil
