Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

Thermal Grizzly Minus Pad Basic - 120x20x1.5mm 4-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics | Envi

GS
Lower VRAM Temps and Better Stability
I picked up the Thermal Grizzly Minus Pad to replace the stock pads on my GPU, and overall I’m really glad I did. The original pads were starting to dry out, and my VRAM temps were creeping higher than I liked, especially during longer gaming sessions.Installation took a bit of patience you definitely want to measure and cut carefully but the pads themselves feel high quality and easy enough to work with. They’re not overly sticky, which actually helped with repositioning during install.After swapping them in, I didn’t see a huge drop in core temps which I wasn’t expecting anyway but my memory temps improved by around 6 to 8°C under load. That alone made it worth it for me, since things feel a lot more stable now and the fans don’t ramp up as aggressively.What I like most is the consistency. Once they’re in place, they just do their job no mess, no maintenance, no surprises. If you’re trying to refresh an older card or improve thermals on VRAM or VRMs, these are a reliable option.Just make sure you get the right thickness for your setup that’s probably the most important part of the whole process.Ver másVer menos
Daniel
31 de marzo de 2026
Works as advertised. VRM temps went down.
I used this on an ASUS X570 board I had since 2019. The thickness was a direct replacement for my application. The application was straight forward , just do not touch it or oils could get on it which may affect heat transfer. I used plastic electronics tools. There was plenty in the package and I still have a strip left over. The problem was cutting it to the size I needed. I ended up having to use a project/craft razor to cut it as it stuck to scissors. There is a plastic sheet over the film that needs to be removed, so keep that in mind. I was overclocking the CPU and while the temps on the VRM were not too high to begin with, I knew they could be better. This did lower them around 3 to 5 degrees C during high stress workloads and testing, which is consistent with their charts. I can not speak for the longevity of it because a few weeks after installing I had to replace the board anyway (broke gpu mounting clip). Any trouble I had with the install was user created, and not product related. It performed as advertised.Ver másVer menos
Amazon Customer
5 de mayo de 2026
Banger TIM
I'm about 6 months in with constant usage, and these pads show little to no degradation. Material shows der8aur's dedication to thermal interface materials research.It dropped the power rail temps on my overheating Alienware (shocker) from 98°c under heavy load down to 72°c under AIDA64.Massively helped.Stability is good, and as long as you can disassemble something down to the cooler and die it should work on just about anything.Ver másVer menos
Dinervity
23 de julio de 2026
Nice
Product was as it and came fast.
Edisson Morales
10 de marzo de 2026
Satisfecho
exelente producto, cumple con lo anunciado.
Jason Slate
20 de mayo de 2025
Great Buy for the price and benefits
I purchased these pads for my AMD Sapphire 6700XT Graphics card and they did make a noticeable difference. The pads are for heat transfer away from the microchips that do not have any cooling. The temps dropped enough to make it more stable and run cooler.Well worth the price in my opinion.Ver másVer menos

Ver más reseñas

Otras opciones

Thermal Grizzly Minus Pad Basic - 120x20x1.5mm 4-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics

Sobre este producto

Reseñas

Lower VRAM Temps and Better Stability

Works as advertised. VRM temps went down.

Banger TIM

Nice

Satisfecho

Great Buy for the price and benefits

También te puede interesar

También te puede interesar