Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

GuliKit TMR Joysticks Replacement for DualSense PS5 / PS5 Edge Controller | Envi

Jax
24 de junio de 2026
Great Sticks
Work perfectly and not too terrible to install. I picked up a cheap solder kit and brush and was able to knock this out in an afternoon. It definitely took some time and a lot of YouTube videos, but once I got the hang of it these worked out perfectly. Have been using daily for months now and no stick drift. Literal savior for my otherwise unusable scufVer másVer menos
1 persona la encontró útil
TheGreatFoox
14 de agosto de 2026
love TMR sticks
amazing joysticks. if you have a ps4/5 controller and have drift, these will fix them right up. the trickiest part of the whole diy part was getting the board ready for these new sticks, actually soldering these sticks on were a breeze. they seem durable, but only time will tell. considering that you never have to worry about drift again, i would consider these great bang for buck. note: when you convert your ps4/5 controller into TMR, you need to recalibrate them using the online tool. look up a start to finish tutorial online and it should show you how.Ver másVer menos
Matthew K. Wimmer
11 de enero de 2025
Good quality parts, installation is difficult.
These TMR sticks feel very nice once installed, and seem to perform flawlessly, at least so far. Stick tension and press-to-click are essentially indistinguishable from the stock ALPS units. No more drift! Don't take the warnings about install difficulty lightly, removing the original stick units is very difficult and if you don't know what you are doing it's quite easy to irreprably damage your controller's main board. The lead-free solder Sony uses in the Dualsense has a relatively high melting temperature, and coupled with the large metal area of the stick cage desoldering is a @#&$. A hot air rework station may make it easier, as you can heat a larger area... I was able to do it with a decent Hakko-style iron, but this is really NOT a job for novice solderers. If you've never soldered before, or don't have much experience, prepare to be very frustrated. Don't say you weren't warned!Ver másVer menos
23 personas la encontraron útil
MichaelW
10 de febrero de 2025
Gold sticker to me for doing it and so far so good.
I bought a 2-pc set of these to install in a PS5 joystick that developed the dreaded "drift" problem. This also meant I spent time learning a new skill, soldering, so that I could do the work of swapping out the old bad joysticks with these new ones. A few weeks of practice on several beginner level soldering kits, along with one painful lesson on just how hot 400 deg Celsius (about 750 deg Fahrenheit) is when you clumsily graze your finger with the soldering iron, and I went to work on my PS5 controller.For me, and I think just about everybody else that I saw on YouTube, the hardest part was (1) getting the PS5 shell open, (2) de-soldering the old joysticks (I only had manual solder pump and wicking wire) to be able to remove them, and (3) being careful not to melt any adjacent cable connecters with the soldering iron because it can get a little tight to maneuver in there. But after managing all of that, soldering in these Gulikit joysticks, getting the controller back together, and using online tool to calibrate them I was all done. With my inexperience it took about 4 total hours, with the de-soldering step really taking up about half that.I've used the controller for about a month now and it's been great. The joysticks move very smoothly and I am able to move my character with really good precision. The only thing I noticed is that they don't have the same resistance as the original joysticks. What I mean is with the original joystick (made by Alps) when you start to move it, in that first 1/4" distance you can feel a little more resistance that then fades away as to continue to move the joystick farther out to the edge...hopefully I'm getting that across well enough to understand. With these Gulikit joysticks that little resistance is not there...but that's not really a knock against them, just an observation. The only knock against these, and the reason for the 4-star rating instead of 5-star, are the included thumb sticks and rubber joystick caps. In my opinion, the thumb sticks don't have as good a grippy texture as the original thumb sticks, but the included rubber joystick caps are definitely more grippy, but I just don't quite care for the star pattern design on them. But I play with them anyway and they are great...just not great to look at in my opinion. Maybe in the future they could offer some color and pattern options for the rubber caps??? An option for you if you feel the same is to simply not install the included thumb sticks, and instead just reinstall the original thumb sticks on top of the Gulikit joysticks.Now, whether these will stay calibrated and never fail or develop "drift" in the future remains to be seen. They use magnets so technically speaking they never should but only time will tell.
James M
23 de enero de 2026
Work as advertised. Desoldering the old one is not fun. At all.
These worked fine. Installation was easy. A lot of people recommend having soldering experience. The soldering isn’t the problem. I recommend having DE-soldering experience. That’s definitely the hard part. Especially with components that have multiple pins and even worse, multiple pins on different sides of the component like these joysticks do.Compounded by double layer PCB’s because you have to remove the solder from the joint AND all the way through the hole to release the pin from the board.So how do you do that or how do you heat the solder on 8-10 pins at the same time to remove the component? That’s the challenge.I can tell you how I did it, but I don’t recommend it because it’s risky and you can very easily damage the PCB beyond repair.I think I saw some tools that allow you to heat all of the pins at once. That would make this a simple job if you can find and afford one of those and I’d consider looking into it if I have to do this again.Otherwise you can risk it and do what I did which was to cut the pins between the component and the PCB with a dremel. That way you can desolder and remove one pin at a time. But one slip and touch the board with the Dremel blade and you can, and probably will ruin the PCB. I’m not sure if you can buy a replacement PCB but swapping that would really suck and at that point I think it would be better to scrap the repair and just buy a new controller.Ver másVer menos
1 persona la encontró útil
David
Complete rip-off
Dont buy these unless you want a poorly functioning controller. Way way way worse than any stick drift you already might have. Dont waste your money.
3 personas la encontraron útil

Ver más reseñas

GuliKit TMR Joysticks Replacement for DualSense PS5 / PS5 Edge Controller

Sobre este producto

Reseñas

Great Sticks

love TMR sticks

Good quality parts, installation is difficult.

Gold sticker to me for doing it and so far so good.

Work as advertised. Desoldering the old one is not fun. At all.

Complete rip-off

También te puede interesar

También te puede interesar