Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

LivTee 4PCS Y-Shaped Motorcycle Turn Signals LED, 12V Motorcycle Blinkers, Fits for Motorbike Scooter Quad Cruiser Off Road, White/Red/Amber White/Red/Amber Y-Shape | Envi

HEAVY METAL BASSIST
24 de julio de 2021
Don't waste your money pay the extra to get better ones sometime cheaper is exactly what u get
These are junk there already screwed up only few months old the running light LED lights have burnt out on right side front now have to replace them and that's BS the wires pulled right out of light on left rear and completely useless now
Matt freeman
Great Blinkers
Very bright, sleek and look great on the bike.Does require a resistor to slow the flash for the turn signal. Very happy with my purchase.Wiring was easy and had it on within 20 minutes.They fit great, I ended up taking apart the OEM blinkers and used the rubber base for a cleaner fit.Ver másVer menos
1 persona la encontró útil
Hunter
5 de agosto de 2020
These look good and seem bright
They work for their intended purpose and seem to be bright, Haven't tested them at night yet.They look good, I chose these over my normal go-to flush mount lights as I now live in an area where people never pay any attention and/or don't care about other cars or bikes on the road and drive like madmen daily.Im hoping that these are as eye-catching as they seem so far, I like the sequential LEDs, My only problem with them is that one of the front running light LED rails doesn't work at all. Not worth returning over this and waiting for replacements just for one set of LEDs that are out and the brake lights and turn signals all work so Im happy! Quality control is iffy, Cant complain for the price.If you are wondering how to install them onto any bike you may have, Heres how:-You need to buy an LED flasher relay for your bike specifically, Resistors suck, are extra work, and are unreliable and dont even work sometimes. A decent LED flasher relay made for your bike is much better-Buy a Turn signal cable kit for your bike, The last thing you want to be doing is cutting the OEM turn signal wires only to have to go back through them later and regret it. Cause you will..-Mounting plates/hardware. If your signals mount into your fairings, You probably need turn signal adapter spacers, Youll need one on the inside and outside of the fairing to mount an aftermarket turn signal that doesn't fit the fairings OEM signal cutout. Otherwise this is an area you may need to get a bit crafty with if they dont fit your OEM holes.Ver másVer menos
6 personas la encontraron útil
Mark L.
13 de enero de 2026
These will do the job !
Good LED turn signgals for my Harley Davidson , good price , quality and easy install & wireing !!!
Gregory ferraro
31 de mayo de 2026
Temu grade garbage don’t buy these don’t waist your time
These are Temu grade junk they are upcharging your for straight garbage do not buy these I repeat do not waist your money on these I just got these and installed them the product isn’t damaged at all and the bolt keeps falling off causing the light to dangle you can not tighten them to stay because it’s a Temu grade product and it just bushes the light off the rubber and has nothing to grab to Amazon and who ever else is apart of this scam should be ashamed of themselves selling a product for $10 on Temu to you like it’s a quality product don’t waist your time your frustration or money in this trash hasn’t even been 24 hours since I installed them and they are falling off because it’s just a bolt shoved in rubber with no glue no back and when you tighten the nut it pushes the rubber off witch is attached to the light I’m so figured with Amazon because we have people on here selling Temu grade items like quality products it’s disgustingVer másVer menos
Amazon Customer
2 de marzo de 2026
One fell apart. Doesn't tighten enough for my application
Doesn't really tighten up. The rubber crushes as you tighten the nut. It's ok if it's not supporting anything else such as metal cable guide or windshield bracket. It just doesn't tighten enough. Also, one of the front lights fell apart as it doesn't seem to be molded strongly to the mounting bolt. I used Gorilla glue for now but I don't think I'll keep these lights in the long run.Ver másVer menos

Ver más reseñas

Otras opciones

LivTee 4PCS Y-Shaped Motorcycle Turn Signals LED, 12V Motorcycle Blinkers, Fits for Motorbike Scooter Quad Cruiser Off Road, White/Red/Amber White/Red/Amber Y-Shape

Sobre este producto

Reseñas

Don't waste your money pay the extra to get better ones sometime cheaper is exactly what u get

Great Blinkers

These look good and seem bright

These will do the job !

Temu grade garbage don’t buy these don’t waist your time

One fell apart. Doesn't tighten enough for my application