Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

Iesooy Micro ATX Case, MATX Case Mini PC ITX Desktop Computer Case Support Micro ATX/ITX Mini PC case with USB3.0, Support 3.5'' HDD | Envi

Brady
30 de abril de 2026
No issues, great case that also looks nice
No issues, except i can’t exactly attach and fit extra fans if needed. Cheapest good case on Amazon. The material is high quality enough and the cooling is mediocre. I’m only using an Igpu with stock intel cooler, and my temps are pretty good. I love how it can fit 280mm gpu’s, as almost EVERY other SFF case caps out at 260mm on Amazon.Ver másVer menos
1 persona la encontró útil
Mark Twain
15 de noviembre de 2025
Almost the best choice if you need the absolute minimum.
If you have an SFX power supply already, as it is the only size this will take, and you prefer the thinnest case, this is the best choice. Otherwise you can find a similar one taking a regular ATX power supply which is slightly thicker but actually shorter.
KazYual
I pushed it to the limit
So I got this case and shoved a 7900 XT in it . The case gets hot, but the temps are acceptable after some tweaking. I love the small form factor and it wasn't too hard to build in, but definitely consider using... Not as hot equipment in it.
1 persona la encontró útil
John Sanchez
29 de diciembre de 2025
No Fan Room
This case sucks dude, I got it because I wanted a small form factor computer but I made the mistake of not really looking at the case its self. The case has zero room for fans almost entirely, it says on the listing that you can fit a "120mm" fan but there isn't any actual places to screw in said fan so you'd need to buy an additional mount for it. Also that's the only part of the whole case you can put a fan besides from the back, which can barely fit an 80mm fan. I know it's a small form factor case but there were plenty of places that fans could have gone but instead there was just sheet metal.Ver másVer menos
1 persona la encontró útil
Joel Ford
5 de noviembre de 2024
Great "small" PC Case!
But beware: it does NOT support standard size ATX power supply. I had to buy a "micro" power supply, but it fits my old micro-ATX motherboard perfectly! You should also be sure that if you use a graphics card, that it will fit in this case. I am using an Intel Arc380, and it fits beautifully!!Ver másVer menos
7 personas la encontraron útil
seth
23 de junio de 2025
Don't buy unless you specifically need this formfactor
does exactly what it says it does, though the space is concerning, you can only mount any 3.5 inch drive using two screws rather than the full four like it shows in the picture. when you fill out the whole gpu space there is absolutely no breathing room for your gpu. as well as your 3.5inch drive would also be running hot due to being pressed up against the gpu. there could have been a better spot for a 3.5 inch drive by the powersupply if you specify sff psus the other mount where you can mount a 3.5 inch drive and a 2.5inch drive is awkward but works. inorder to install the gpu you must remove two of the drives and all the ram from your motherboard making it not ideal to ever clean. the build quality is mid tier at best and the over all cooling of the system is extremely poor.Ver másVer menos
2 personas la encontraron útil

Ver más reseñas

Iesooy Micro ATX Case, MATX Case Mini PC ITX Desktop Computer Case Support Micro ATX/ITX Mini PC case with USB3.0, Support 3.5'' HDD

Sobre este producto

Reseñas

No issues, great case that also looks nice

Almost the best choice if you need the absolute minimum.

I pushed it to the limit

No Fan Room

Great "small" PC Case!

Don't buy unless you specifically need this formfactor