T. Schutt
18 de agosto de 2024
Wow! Works Great!
I just applied my first UltraGlass Screen protector, and the application system works great! I will be back in a few weeks to give report on durability. But so far, so good.1. Remove old protector, applicable.2. Thoroughly, clean the phone screen with a lint free cloth or paper towel dipped in rubbing alcohol or denatured alcohol. (I prefer denatured alcohol. KEEP AWAY FROM SOURCES OF IGNITION!)3. Look across the screen to check for lint and use one on the provided lint free polishing clothes as needed.4. Apply the UltraGlass screen protector using the included template frame.5. Allow the screen protector to adhere to the phone screen. Help it on the edges by applying light pressure with your finger, movingly from the adhered portion of the screen protector towards the edge, watching the air gap disappear in front of your finger as you slide towards the edge.6. Polish your new screen protector and enjoy your phone, knowing your phones screen is protected from cracks and scratches!Less than 5 minutes, if you need to remove old screen protector. Two minutes if you are placing the screen protector on a new phone.I am glad I spent a little extra money of the UltraGlass Screen Protectors. The package comes with a frame for application, so the Screen Protector is perfect aligned. You pull the tab to expose the adhesive to the phone screen, then just have a little patience, and watch the screw adhere itself you your phone screen. About 30 seconds. I needed to give it a little help to reach the top edge. Be sure to apply light pressure to the protector to where it is already adhered to the phone screen and, gently, help the adhesive finish bonding to the screen. Work, slowly from the bond part of the screen towards where you see an air gap. You should see the air gap disappear in FRONT of your finger as you gently, and slowly glide your finger towards the edge. Applying light pressure on the edge of the screen and sliding your finger towards the bonded portion of the screen could result in an air bubble, so DON’ DO THAT!It should go without saying that I, of course, thoroughly clean the phone screen with denatured alcohol, sometimes referred to as, “FUEL.” So don’t smoke while cleaning! Rubbing alcohol will also work, but rubbing alcohol is more than 1/2 water, as opposed to denatured alcohol, so it takes rubbing alcohol long to dry. But, if that is all you have, go for it. Just be sure your screen is dry and lint free prior to applying the protective screen. Cleaning and assuring no lint is on the phone screen is the most important step so don’t skimp here. Actually adhering the protective screen to the phone screen is the easiest part thanks to the UltraGlass template.It took me far longer to write this review than it did to, flawlessly apply the screen protector to my phone. Flawlessly applying the screen, including cleaning took less than two minutes. This was a new phone, so I did not have to remove an old screen, first. However, that should not take long and denatured alcohol will remove any stray adhesive from the previous screen protector.Great product, great system for application!Perfect fit, great value for the money!Ver másVer menos
27 personas la encontraron útil
![TORRAS for iPhone 17 Pro Max Screen Protector [12Ft Military-Grade Shatterproof] [9H+ Aerospace Tempered Glass] Anti-Scratch Full Coverage Fit Screen Protector 17 ProMax 6.9" 2-Pack](https://m.media-amazon.com/images/I/811FD3vfMtL._AC_UL320_.jpg)
