MattInTech
7 de noviembre de 2025
Working on a 2020 Buick Encore
I originally bought another kit that was supposed to plug into existing wiring in the rearview mirror, but it turns out that on specific options (auto dimming mirror, etc.). Since that didn't work, I needed a kit that would plug into the fuse box... and this Gebildet kit worked great.For the Encore, you have to pull out the small accessory box by the driver's left knee (pull it down, pinch the back to get past the blocking clips, and then simply lift it out. The fuse box is behind it. You'll need light and to get down below it for access. I chose to use the inline additional fuse on fuse 22 (DC accessory) and grounded on the metal to plastic connector right by the drawer we removed to get here. Running the cable is a bit difficult, you have to pull the side plastic panel off, it can be "pushed" out from the opening to get to the fuse box. There are 4 retaining clips and it's best if it comes basically straight out. You can run the wire up the pillar and across to the mirror above the roof liner.So far the harness is working very well like this and seems well made. It's certainly not dealing with much heat or cold since it's inside the cabin. At this price, and coming with everything I needed it's a great value.Ver másVer menos
1 persona la encontró útil
































