Joe Schmoe
11 de marzo de 2025
Love this MOBO. Entering BIOS ... not so much. You NEED to READ this!
I love this motherboard. It's full of all the features I was looking for. It has support for gen 12/13/14 CPUs, >128GB DDR5 5600 MHz RAM, 6x SATA 6G ports, 4x M.2 slots, 4x PCIe slots, plenty of USB3.2 Gen 2 ports, WiFi7, a HDMI port, a Display Port, and excellent heat management. It handles both single disks via AHCI and RAID arrays via Intel RST seamlessly. Lots of capability at a reasonable price of $209. Love it!HERE'S THE PART YOU NEED TO READ.Nowhere in the documentation is it stated which video port is the default port that should be used when booting up to change BIOS settings. In fact, there really isn't a default port. I chose the HDMI port because I had an HDMI cable. As I rebooted and attempted to enter BIOS (pressing Delete), I got NOTHING but a black display in about 9 out of 10 attempts. The 1 out of 10 successes led me to believe 1) the board had some sort of intermittent quality problem, 2) some other component had a quality problem or 3) I made a "pilot error" building the PC. After ~2 long weeks of debugging, swapping memory sticks, testing the power supply, looking for scratches or other damage to the motherboard, ... , I was about ready to send the motherboard back as defective. Before doing so I borrowed a Display Port cable and rebooted. With both ports connected to displays I observed a splash screen on every reboot, ~90% on the Display Port side and ~10% on the HDMI port side. In other words, the system was performing just fine the entire 2 weeks. I just couldn't see BIOS on the Display Port (because it wasn't connected). I could see it on the HDMI port, but only 1 out of 10 reboot attempts. BOTTOM LINE: I give the motherboard itself 5 stars. I'd give it 6 if I could. On the other hand, I give MSI's documentation and BIOS 1 star. MSI should correct this by either 1) documenting the flip-flop behavior, 2) have the BIOS send video to both ports by default (and not "roll the dice" at each reboot) or 3) not send the video exclusively to a port that's not even connected.Ver másVer menos
21 personas la encontraron útil
