Bulletpoint Metal Dash Mount Cell Phone Holder Compatible with 2013-2018 RAM Truck & 2019+ RAM 1500 Classic (RubiGrid Spring-Loaded)

$75.79

Entrega garantizadaEn stock

Salida a tu país: 13-20 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

Sobre este producto

CUSTOMIZE YOUR COMMAND CENTER Looking for the most versatile and customizable device mounting solution compatible with the 2013-2018 RAM Truck 1500, 2500, 3500 and 2019+ RAM 1500 Classic? The RubiGrid system by Bulletpoint Mounting Solutions gives you the freedom and flexibility to securely mount multiple devices exactly where you want them along the RubiGrid platform. WHAT IS RUBIGRID? RubiGrid is a fully modular dash mounting platform made from laser-cut metal that uses AMPS mounting balls. This means that you can mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect command center. Whether you need to mount phones, tablets, action cameras, radios, GPS systems or TPMS systems, RubiGrid can handle it. In fact, it can hold up to 3 devices. WHAT'S INCLUDED? 1x RubiGrid Dash Platform 1x AMPS Style 20mm Mounting Ball with Hardware 1x Standard 7cm Carbon Fiber + Kevlar Hybrid Mounting Arm 1x Spring-Loaded Universal Phone Holder (expands open up to 3.4" wide) QUICK AND INSTALLATION Installation is as simple as removing 2 screws in the dash, setting the all-metal base in place and securing it with the same 2 screws. No drilling, no modifications. The end result is a rock solid mounting base for your devices that you can depend on. FITMENT 2013-2018 RAM Truck 1500, 2500 & 3500 2019+ RAM 1500 Classic Does NOT fit 2019+ RAM 1500, 2500, 3500 or TRX.

Marca

Bulletpoint

Modelo

B0CG2FQX6K

Categoría aduanal

All Departments

FreeLancer75

SOLID 2014 Ram Dash Accessory Mount

This is a really nice all metal dash mounting plate with carbon fiber & plastic extension pieces. It uses the two factory hex screws hidden under the rubbery plastic "sunglasses" holder above your facyory radio on 4th Gen Ram trucks.They onclude all necessary tools (including a magnetic tip screwdriver so you don't lose the screws).Once installed, the plate sits just above the flush edge of the rest of the plastic bezel that holds the radio and AC controls to your – I wish they had chamfered it so it would sit down a couple of millimeters to be flush with the rest of the plastic. But it still looks really good and the bottom of the bracket has rubber strips so that it doesn't scratch up your plastic. A really nice touch.I purchase the single arm kit. Then added optional BulletPoint add-ons, a second arm, the magsafe phone mount round plate, and finally the ham radio accessory. This way I can have my phone right in front of me, and my radio just to the right angled towards me so that at a glance I can see if it's on or what's going on. It doesn't block the AC vents or the radio screen. And with the ball mounts I can raise or lower, move left or right, the arms in any position I prefer.And if you prefer a different setup, you can easily undo the ball mounts on the accessory end. Pop your new accessory on re-tighten the thumb screw and you're good. There's even room for an additional ball mount in the middle. The plate holds three ball mounts.And if you're really roughing it, and you find that the two factory screws are just not cutting it, because you've got maybe a lot of weight on your arms kind of pulling on the mount, there are the additional two self-tapping screws that you can use for the mounting bracket so that you have four screws holding the mounting bracket to the dash. There are two holes pre-drilled in the plastic for these two additional self-tapping screws. I think they were intended to hold the factory plastic/ rubber cover in place that you removed in the beginning, but are in a perfect place to put those self-tapping screws. And if that's not enough, you may ask bullet point if it's safe to use blue loctite on some of those screws because I don't know if they're only tapping into plastic or if there's actually something metal under the plastic that the mount screws go to. So far I haven't driven very much to notice anything getting loose. But I've only been doing City driving so far. We'll see how it holds up long-term. But I really like it!The only downside is that in the YouTube videos I reviewed before making my purchase they showed a bullet points 50 cal bottle opener in the package. I didn't receive that in mind. It might be a cost cutting thing or maybe they just forgot. It's obviously not listed in the box inventory but it would have been nice to get one. But I'm not going to hold off any stars for that. It might have been for influencers only.Bullet point, thank you for making a very good product! I love good looking accessories for my truck. I want it to look good, not gaudy!