KOLIPI Acrylic Display Case for Collectibles Assemble Clear Acrylic Display Box for Lego Alternative Glass Case for Showcasing Figures Doll Toys Home Storage(10x10x15.7 inch, 25x25x40 cm) | Plexiglass Box for Lego Figures Dolls Models, Dustproof Protection, Stable and Stackable, Assembly Required 10x10x15.7 inches

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

• S

  Snowball

  Nice acrylic display box

  This is my review of KOLIPI’s Acrylic Display CaseA nice acrylic display case that comes in 13 different sizes (see seller’s home page).On a scale of one to ten, assembly is about a five. Not really hard, but you need to be careful. It took me about ten minutes to finish the assembly. It is made of acrylic, not glass, so it is a bit wobbly until you insert the clear acrylic into the base. At that point it is fairly sturdy. You also get a string of LED lights, which I am not using.You get five acrylic pieces, and the connectors to put it all together, plus a sturdy base. I am using them to display some of my more complicated dioramas, and they are perfect for that purpose.Before assembly, you will need to remove the protective film on the pieces, which was fairly easy, and then put them together using the provided materials. I will say that the holes drilled into the acrylic sheets, matched perfectly to the corner pieces. And, although the securing pins were a bit tricky, once I figured it out, the rest of the assembly went without problems.Nice boxes, and great for displaying my dioramas. I will be purchasing more.Ver másVer menos

  11 personas la encontraron útil

• W

  Will Emmons

  This is a good case

  If you're between this model and the case with slots, get this one it's way better. If you read the assembly is hard, that's a lie.I had mine together in about 10 minutes, it comes with a little USB string of led lights, I didn't use mine but saved them for later, gloves, and plenty of extra bits just in case. The case itself looks good, very clear. Once assembled its sturdy, survived a car ride and a little rough handling. The acrylic is easy to scratch though, so be gentle with anything metal. And it's a dust MAGNET, so pick a clean area and wear the gloves.The only down sides were I would prefer a gloss base, mine was matte and the case can't be secured to the base. But a little work around, you can push the extra pegs included into the gap the case slides into the base. They're the perfect size to lock it in and then have feet on the bottom.It even includes stretchy cotton gloves, i didn't think they'd fit my XL hands but they made it enough to handle assembly without fingerprints.Ver másVer menos

  9 personas la encontraron útil

• C

  Cal Silvious

  Works well for what I need

  I am rather happy with the case. It was well packaged and easy to put together. I watched the video of how to put it together and that was good. The gloved that came with it were far too small for me, but I had nitrile gloves and they worked fine. I do recommend gloves. As another reviewer said it will attract dust like nothing else. You can feel the static cling coming off it.It was a little more flimsy than I expected. I was worried each time I put the pins in that the sides would break. But I took care and nothing broke.I have no idea how the lights are supposed to fit in the display. There is no hole for the wire to go through the sides or base, and it will not sit properly with wire going under the side. The string of lights is just a loose wire and there is not even a suggestion of how it is supposed to be placed.Had a heck of a time removing the protective cling film from the sides. But I didnget it in the end.All in all took less than 30 minutes to put together and it works well for what I needed.Ver másVer menos

  1 persona la encontró útil

• N

  Nancy B.

  8 de febrero de 2025

  Excellent Product

  Easy solution to protecting an object with minimal cost. Have a UGEAR clock that I wanted to cover. A glass dome was expensive, and I found this product. Perfect! It took about 30 minutes to assemble. Instructions were detailed enough and the quality of the pieces and box that it came in were great. The instructions said to start with the top panel first. I worked on a granite countertop (hard surface and clean to keep the panels from getting marked. I put the corner pieces on top and put the pin through the sleeve and put them through the hole in the top panel from the bottom and set it down on the counter and pressed down until I heard the snap. After completing that I took the side panel and installed the angle pieces in the same manner leaving the holes that would join with the top panel empty. Mated the side panel to the top piece and used the side of a butter knife to press the pin in until it snapped. Continued on until it was done. Kit came with cotton gloves, a wipe, and additional plastic joining pieces. It looks great! The panel holes lined up and there are no gapes between the panels. It fits in the base great and it serves the purpose well. Would buy another without reservation.Ver másVer menos

  5 personas la encontraron útil

• V

  Victoria K. W.

  17 de julio de 2026

  Excellent product!

  Excellent product! Very well made. Assembly instructions were very clearly written and thorough. Came with nice accessories used in assembly, i.e. white cotton glove, wiping cloth for fingerprints. Even came with a mini LED light string, which I did not expect. Thanks!Ver másVer menos
• M

  Moonracer

  21 de mayo de 2026

  A nice protective case for your precious

  It's not bad.Okay it doesn't come with everything you need to put it together. Clear instructions if you don't have a brain dead moment like I did, but still clear instructions. Even comes with fairly nice gloves to put it together and not leave fingerprints during the assembling process. Size is just right for what I wanted it for VERY happy about that. The storage capacity I personally put with the size and it is just right. Gives some space without being to much exactly what I was looking for there.I honestly didn't need/want the lighting so I have it but it's not in the case nor do I want it in the case so I can't say anything about the lighting. Also I didn't think adding the lighting would allow for it to remain as sealed as it should be, so that was another reason for not adding the lighting. Also worried what the lighting might do to the item(s) inside, so also a reason I didn't add them. As for protecting the item within from dust and such. I'm not sure. It might work it might not can't really say, but I think probably it will. It seems that the edges are fairly tight so should do well protecting whatever is inside. It does take some time to put it together, and pulling off the protective plastic from the inside first seems to be the smarter way to go. Also remembering to pull off the plastic before you connect the pieces is helpful. Though I forgot on two sizes luckily it didn't seem to leave any behind when I finally noticed and pulled off the plastic after, so that was a relief.Ver másVer menos

  1 persona la encontró útil