TP-Link Deco XE75 AXE5400 Tri-Band WiFi 6E System, 3-Pack

Salida a tu país: 18-25 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

• H

  Henry W

  3 de julio de 2026

  Good buy to get rid of dead zones for Wifi

  This TP-Link Deco XE75 3-pack basically fixed every dead zone in my house. I've got a two-story place with a detached garage and I used to lose signal constantly in the back bedroom — now it's solid everywhere, garage included.Setup was stupid easy, took maybe 15 minutes through the app, and it walks you through placement for each unit. The new 6GHz band is noticeably faster for stuff close to the router, and having tri-band means my smart home devices aren't fighting my laptop for bandwidth anymore.Only real gripe is the price — this isn't a cheap upgrade. Also if you don't have a lot of WiFi 6E devices yet, you might not notice a huge speed boost right away, but the coverage alone is worth it. No more random dead spots, no more yelling "is the wifi down again?" from the other room.Would recommend if you've got a bigger house or just want to future-proof your setup.Ver másVer menos

  1 persona la encontró útil

• R

  robert raines

  23 de julio de 2026

  Completely solve my mesh wifi needs and a surprisingly inexpensive price.

  I've been having terrible issues with my google nest mesh wifi system. Very slow download speeds and incredibly poor upload. Kept checking modem directly and realized all was well there. Finally broke down and decided to give these a try.We have a large 1 level home spread out across 5000 sq ft so coverage from one wifi router would never worked. I was using 5 google nest mesh routers and getting pretty poor speeds. Coverage was there with strong wifi but I'm guessing the mesh network was a problem. If I was near the main router puck, speeds were reasonable.Soooo...broke down and finally decided to give these a try. Honestly went with these because of the price. Happy to say they've not only completely turned around my wifi speeds but now cover the entire house with just the 3 devices. Setup was a lot easier than I expected as well.Completely satisified with them and think for the money, incredible value. I didn't even know my tablets had wifi 6 on them until I turned these on :)If you've got coverage and speed issues....give em a try for sure.Ver másVer menos

  1 persona la encontró útil

• S

  SCOTT

  8 de julio de 2026

  Completely Eliminated Every Single Dead Zone!

  This mesh system is worth every single dollar. Setup via the app was incredibly straightforward, and it seamlessly blanked a massive footprint with lightning-fast, stable internet. The dedicated 6GHz band handles heavy streaming and gaming flawlessly without any drop-offs. If you are tired of weak router signals, this is the ultimate fix.Ver másVer menos

  1 persona la encontró útil

• S

  Spencer

  9 de julio de 2025

  Huge mesh upgrade from Google Nest!!

  I’ve now had these for four months and am so happy with my purchase that I find myself writing a review. I was looking to upgrade from my google nest WiFi (purchased in 2022) as I was having issues when my wife and I worked from home simultaneously while both constantly on video. Our house is taller than it is wide, and we need four stories of WiFi coverage as we both work in the finished attic. I was set on upgrading to 6E with the addition of the third 6ghz band, which I can specify for connection for both our work computers.Setup is a breeze, maybe took me 15 minutes. I’ve enjoyed the deco app and, since I hardwired my points together, it honestly discovered each device on its own without any fuss.We pay for 1G speeds and with Google nest we never could get north of ~300gb, and typically sat at 80-150gb. The deco immediately was surpassing 500GB without hardwiring them in. Once I connect them via Ethernet we were getting speeds of 900+ consistently, across the whole house. Call me crazy but when I pay for 1000GB, I’d like to get my moneys worth.There are many features of the Deco app I like- but I LOVE that I can have both a separate IoT network and a guest network with the click of a button. You can easily see what points have what devices connected to them. You can also reboot your system, check for updates, and optimize your network. The only issue I’ve had with the app is my weekly reports never pull thru, which is a minor issue.Maybe my favorite part of this system is that it is reverse compatible! I got a 3 pack of these 6Es and they are great for heavy use in my house; but I have a shed 80 feet from my house that I trenched an Ethernet too. Point being, I wanted to have some smart plugs/iot devices in my shed but didn’t want to have to buy a single 6e device, so I simply got a used X55 point and they all work together seamlessly! Google doesn’t have reverse compatibility so this was a big selling point for me. Even my X55 puts up 800GB plus!Since our household setup is four floors, the final feature that made this a no brainer for me was having the 3 Ethernet points in each device. My modem is in my basement and to optimize my network, my other two points need to be in my attic, and my garage. Having 3 ports allows my basement device to receive from the modem, have one output to the attic, and one head the other direction to my garage. This saved me a ton of hassle of having to wire from my attic, back down to the garage. Lots of flexibility with your setup having that 3rd port. This is what sold me on TP Link over Eero.I would highly recommend these to anyone looking to upgrade or get into a mesh network. If you are paying for speeds and not realizing them, I’d give these a shot. The reverse compatibility, 3 ports flexibility, and app functionality have blown me away.
• B

  Bob Atkins

  6 de febrero de 2024

  Pathetic roaming and frequency management

  I am an network engineer with 30+ years of experience - way longer than WiFi has been around. I have designed and implemented many business WiFi systems that support seamless roaming over larger areas so when I say that this system is a pathetic implementation of meshed WiFi and roaming I do have experience to back it up.I bought this system because I wanted to upgrade my home's WiFi system with a 6GHz WiFi 6e capability and I was sorely disappointed in this system's meshing and roaming capability. I performed extensive testing with demanding applications on modern Android phones, Apple iPads, Samsung tablets and laptops. The bottom line - this system is an abysmal failure for supporting roaming in a meshed WiFi network.This system's ability to allow devices to roam between access points is pathetic to non-existent. You might as well have 3 independent WiFi access points in your home. In spite of everything you read about this system it is technically inferior because it relies on using the exact same WiFi frequencies on all units when they are meshed! This pretty much kills the ability for devices to smoothly roam between the APs without dropping, re-scanning and re-connecting.The reviews for WiFi access points generally only emphasize performance - how fast you can download and upload and how much the signal degrades based on distance to the AP. That is fine for a single AP however, any system like this one that is supposedly offering a fully meshed solution it is an inadequate measure of performance and completely leaves out test results for the main reason to consider a meshed system in the first place. In fact, I have yet to read a single review that addresses a consumer grade system's meshing/roaming capabilities and performance.This system like almost all of the 'consumer' grade systems do not set the WiFi frequencies independently for each AP. This system chooses the exact same WiFi channels for 2.4GHz, 5GHz and 6GHz for each node. This makes it all but impossible for devices to smoothly roam between AP's. Why you may ask? Because the device has a difficult time distinguishing between a signal that is fading from a more distant AP and the stronger signal of the next AP (that it has yet to connect to) effectively causing the device to stay connected to the distant AP until it is overwhelmed by the interference of the stronger signal from the the same WiFi frequency on the closer AP next to the device. Eventually the device just drops the connection to the distant AP and goes through a 'scan and connect' to the closer AP with the stronger signal. This will always interrupt VoIP (WiFi) calls and other latency sensitive applications such as gaming and trading apps.This system purports to offer 'Fast Roaming' (802.11r) but it is totally ineffective.Next there is the issue of frequency management. A good system will only use 2.4GHz bands with client devices as a last resort. Either because the client device can only connect on 2.4GHz channels (many IoT devices only work on 2.4GHz channels) or because a device has gone beyond the useful range of a 5GHz channel. 5GHz channels are a much lower power level and don't penetrate walls very well. 2.4GHz channels offer better penetration through walls and floors.A well designed and implemented WiFi AP will 'encourage' devices to connect on 5GHz channels because 5GHz offers much better performance than 2.4GHz. This system does not do this AT ALL!! In fact it will mostly connect at 2.4GHz - especially once a device moves far enough away to make 5GHz to weak. From that point on - even when switching (I can't call it roaming because it is a drop, scan and re-connect) to the next AP it will tend to remain on 2.4GHz channels. Only devices that stay relatively still, close to an AP and rarely move to another AP will utilize 5GHz channels and even then for no reason the device may switch from 5GHz to 2.4GHz even if it doesn't change position and has a strong 5GHz signal. This could be caused by nearby interference (your neighbor's WiFi). Please don't confuse this with the selectable option that causes the AP to only use 5GHz channels - an option that is disruptive to most devices and can actually make roaming and the overall WiFi experience worse by depriving devices the ability to use 2.4GHz channels when 5GHz channels would be ineffective.The absolute worst aspect of this system (and most other 'consumer' meshed WiFi systems) is that it used the exact same 2.4GHz, 5GHz and 6GHz channels for each node making it impossible to mitigate any external WiFi interference near each node (mostly your neighbor's and outside WiFi systems) since each node is bound to be exposed to different WiFi frequency interference. There are so few WiFi channels available that this means at some locations you will have good WiFi performance with the nearest AP and at other locations performance will be poor due to local interference newar that AP.The bottom line don't buy this if you are looking for smooth and seamless roaming between APs.The high cost of this system just means you are throwing more money away - not getting a good solution.In case you are wondering - I returned mine.
• A

  Andrea C

  12 de junio de 2026

  Amazing

  Upgrading from EERO to the Deco system has been a night-and-day difference. These two really aren’t even in the same league. The Deco performs exceptionally well, especially in multi-level homes where consistent coverage can be challenging.The speeds are exactly as advertised, and the setup process was incredibly simple and user-friendly. Everything just works smoothly right out of the box.I highly recommend the Deco to anyone looking for reliable, fast, whole-home Wi-Fi—it's been a fantastic upgrade.Ver másVer menos

  1 persona la encontró útil