Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

6U Wall Mount Server Cabinet Network Rack Vented Enclosure Locking Door | Envi

Jamie Ryer
10 de noviembre de 2022
Watch the assembly video!
Still giving this five stars. It you will need to watch the assembly video. Impossible to assemble otherwise. Very well build and great price. Just need to watch video took me over an hour to figure it out until I found the video. Then plan about 30-45 mins to figure it out.Ver másVer menos
3 personas la encontraron útil
Jeremy c
Great cabinet: buy cage nuts too!
I was skeptical when I saw the package, and I was underwhelmed by the single sheet instructions. That being said, it went together easily and smoothly. It's easy to work in and it makes for a tidy network cabinet. It's a sturdy structure for sure. They included a few cage nuts too, which is really kind. I suggest picking up a box of cage nuts and bolts however, because there's only a few included. It does include concrete anchors for mounting it, but if you plan to mount to a stud wall, I suggest bringing lag bolts.I'm happy overall, and would buy it again.*Update* I did buy another unit for a second deployment. No issues with either unit. Same sketchy looking box.Ver másVer menos
8 personas la encontraron útil
Studduck
Assembly experience
Just so much harder than it had to be because of short shrift instructions and just over a minute video that adds nothing. Instructions for removing the side and front doors were okay. After that, you can pretty much throw them away, except they do provide a framework for the order of assembly. The first problem I ran into was where the rails fit. After wasting 45 minutes to try to figure that out, I decided skip that step, with the thought in the back of my mind that not mounting the rails would result in me having to disassemble. I didn't use any of the mounting hardware except for the washers. I had four 2 1/2 inch stainless steel that I used. I used a drill bit to drive a pilot, which really helps to sink the screws. I mounted the side door frames which lines with the back plate. Next slide the bottom of the tray - bit tricky but make sure the plate rests on the lip of the back plate - there are no screws that hold it in, but it was surprising sturdy. Next is the top plate which snaps in similarly to the bottom plate. Next is the front frame and it has places for four screws. I revisited the rails and to my surprise they could be screwed in to place with no difficulty. At that point, I left off all the doors and essentially began transitioning my network. I bought two shelves that I wouldn't recommend as they had some alignment issues, but I managed to get them to work. I added the Pyle power strip, and it's not really that functional - access to outlets is very difficult and most adapters will use the space of at least two of the outlets. But it looks good. I re-routed all the wires and moved my router and modem - see picture. Then I added the doors and the ground cable. I'm sure I'll modify the wiring later as I look to add another network device and maybe a couple of hubs. But before I do that I want to add a couple of fans. I was expecting the unit to have fans and it's not marked that they are not included. Moreover, would have been nice if the seller had recommended a fan that is available online. I think the unit should have included a couple of shelves as I think it's going to take some experimentation to find the best way to use the space.Ver másVer menos
3 personas la encontraron útil
Steven W. Fairfield
13 de enero de 2024
Great Value for the money
This product was fairly simple to put together. The instructions could have been clearer, but a little common sense is sufficient. I really like the mounting template, it came in handy.
1 persona la encontró útil
Alejandro Salazar
Nice little rack!
Used this rack twice already and it works great! The door does slightly fall due to the hinges having play in them but its normal and its not like anyones going to pay attention to such detail. The door doesnt rub on the frame when closing or opening so thats good enough for me to say the least! Havent had either customer complain about them.Ver másVer menos
2 personas la encontraron útil
Marcus Kemp
21 de junio de 2023
Not for real IT work, garbage
This cabinet sucks to put together for starters. After finally getting to using it for a job I noticed the back is solid so I cut it out with the sawzall, needed it open for the power outlet. There are no vents on the bottom or side, only front and top has spots for fans. This rack was not designed by anyone that does this kind of work. Spend the money and buy a TrippLite, far superior. This rack is garbage for anything that throws off heat. Will never buy again.UPDATE: Finally tried to use this last one I bought. The equipment doesn’t fit in the rack. This is a piece of garbage from trying to follow the instructions putting it together to the actual deployment. I bought these because Tripplite was out of them. This unit isn’t worth 50 cents.Ver másVer menos
3 personas la encontraron útil

Ver más reseñas

Otras opciones

6U Wall Mount Server Cabinet Network Rack Vented Enclosure Locking Door

Sobre este producto

Reseñas

Watch the assembly video!

Great cabinet: buy cage nuts too!

Assembly experience

Great Value for the money

Nice little rack!

Not for real IT work, garbage

También te puede interesar

También te puede interesar