Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x2.0mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation. | Envi

Tosh H.P.B.
30 de junio de 2026
highly recommended.
worked as intented.
Family Bee
9 de noviembre de 2022
Definitely not your regular impregnated thermal foam.
This is not your regular impregnated foam. This stuff is heavy. You can also tell by the temperature in your hand that it's not your everyday thermal foam substrate. It has the highest thermalIt has the highest thermal transfer of of anything I can find at this writing. I have to admit one side of the peel off came loose when trying to cut the pieces but based on the diamond pattern I suppose this makes sense. It was easy to apply, easy to measure, and stays put even if you have to flip your surface over. Time will tell about heat transfer, and how long it will last. But it definitely does not feel like plastic. Impressive indeed. It took me three failed purchases to get here. I should have learned my lesson before. It's worth it.Ver másVer menos
1 persona la encontró útil
chaosmaou
Dropped my GTX 1080 idle temps by 19c and my load temps by 11c!
My GIGABYTE GTX 1080 WindForce 3X OC (GV-N1080WF3OC-8GD) is almost 6 years old at this point, and even though my GPU core temps never rose above 73c I was getting full system reboots after some time. I ended up repasting the card with Gelid GC-Extreme thermal paste on the core, but this didn't completely fix the issue and didn't drop by temps from a whole lot of Corsair TM50 Paste from around two years ago. A quick investigation of the card while playing God Of War revealed that my VRMs on the GPU were getting VERY hot.I ended up taking the card apart, and found out that my GPU has 4 different thicknesses of pads, 0.5mm, 1.0mm, 1.5mm, and 3.0mm. I ended up getting a pack of each, and replaced all pads across the die side and backplate. Only difference from before and after besides the pads and paste was that I covered individual memory chips rather than a strip of three or two to save the material as these pads are a bit expensive.These absolutely made a night and day difference. My Idle temps dropped from 50c to 31c on the GPU core, and fully loaded it's hitting a max of 62c. My card isn't overclocked, by man.Pros:Idle temps dropped from 50c to 31c.Load temps dropped from 73c to 62c.If you use a sharp exacto-knife and a cutting board, the material, even in the 0.5mm size is easy to cut and handle as long as you are careful. The top layer of plastic may come off when cutting, but this didn't effect the thermal pad at all.Pros: The price. You pay a premium for these pads, especially if you need 4 packs like I did, but it was totally worth it. Especially since right now my 1080 is almost worth as much used as it was brand new thanks to current chip and GPU shortages. Because these have performed so well, I haven't deducted any stars because of the price.Ver másVer menos
4 personas la encontraron útil
Eric and Nichole
18 de junio de 2025
Easy to cut, dense, fits on raspberry pi 4 in argon one v.2 case!
I bought this to replace the 1.0 thermal pads needed for a raspberry pi 4 in an Argon One v.2 case. They are easy to cut, the backing peels off nicely and the quality feels great as the material is dense. I put some down on an m.2. ssd in the argon case as well and it adhered nicely to the uneven surface. Would gladly buy again!Ver másVer menos
1 persona la encontró útil
JO
Expensive, but worth it.
They are packaged well and feel easy to work with. Cutting to size and then peeling off the plastic to apply is pretty easy with these. They're firm and stay intact with handling.Performance is more than adequite for most situations, I'd buy these for any midrange to high end GPU.Ver másVer menos
Levi Tagle
Does the job
Got this ones for a renewal of a GTX titan memory pads and work very well keeping temperature in the intended zone.

Ver más reseñas

Otras opciones

Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x2.0mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation.

Sobre este producto

Reseñas

highly recommended.

Definitely not your regular impregnated thermal foam.

Dropped my GTX 1080 idle temps by 19c and my load temps by 11c!

Easy to cut, dense, fits on raspberry pi 4 in argon one v.2 case!

Expensive, but worth it.

Does the job

También te puede interesar

También te puede interesar