NavePoint 6U Server Rack with Swing Gate - Wall Mount Rack for 19 Inch IT & AV Equipment - 18' Deep, Black 6U - 18in Deep

Salida a tu país: 16-23 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

• E

  Eric Spayd

  6 de julio de 2026

  Nice Rack

  Perfect size, quality rack. Sturdy and easy to assemble and install.

• R

  Randy J. Jost

  8 de abril de 2026

  Rack for home server

  I bought this rack, and a shelf also, for setting up my own home server and IT set up. Worked great for me, although it would have been better if it was a bit deeper, say 1-2 inches more. So, check the depth of what you want to put in it to make sure it meets your needs. Solid construction, with option for either floor, desk or wall mounting. All the hardware you need for which ever approach you want. If you are putting in a lot of 1U units, you may want to get some additional cage nuts and screws if they do come with your units. Overall, a good choice for me.Ver másVer menos
• P

  Peregrine

  28 de agosto de 2025

  Great quality at a great price

  I spent a long time searching for a quality rack at a reasonable price and this one kept coming up. I was hesitant due to all the negative reviews about screws, alignment, and the brass fittings, but I decided that with all the positive reviews the issues must be user error. Fortunately I was right. On the issues raised... don't assume the holes will align simply because you fitted the pieces together. Visually align them and then carefully put in the screw straight. These are sheet metal screws - expect them to be tight and yes, you can strip them if not careful. The brass inserts are meant to be snapped in, not just pushed with your finger - loved the video of someone gently pushing it up and being surprised it fell out. I got something about the same size round as the brass fitting so as not to deform the brass and then gave it a light tap with a hammer (set that side on the ground and hit down). There's a ring near the head and if popped in correctly it will spin freely around that ring but not come out. As for complaints that the mount holes are 18.25" apart - so? Plan for it. Not all studs are perfectly 16" apart. Mine are 20" apart and are metal (Florida house), which meant I mounted mine using heavy weight dry-wall anchors. I also had no issue with the cage nuts and would strongly recommend using that side - you won't have threading problems and most rack-mounted equipment comes with cage nuts. My only complaint is that the supplied lag bolts for mounting are useless unless you're going directly into wood. They aren't long enough to go through dry-wall on the way to studs.Ver másVer menos

  2 personas la encontraron útil

• B

  B. A.

  Great rack overall

  This rack is sturdy and easy to put together. I had a few issues however. First is the swing arm mounting pins. The brass pieces you place into the rack need to be hammered in to sit properly, however, after doing so, I found the spring loaded anchors can only fit and lock on 1 side easily. What I mean is, once you have 1 size locked in, the other side will not go in enough to where you can lock the spring loaded anchors. I managed to push really hard on the bottom, it eventually went in. However the top goes half way and stops. If I release the opposite side, then this anchor goes right in on it's own. I've tried moving the entire rack after building it to see if it was an alignment issue but nothing changed. I mounted it anyway. I doubt I'll be swinging it open much so it's not a big deal but the convenience is there. The second issue and a glaring one at that is the rear of the rack itself. The parts that press against the wall eat into the space meant for hardware. I purchased a Rosewill PC case, a 4U 9 Bay 3 fan case. Amazon lists it as 17.8" deep. Well, I had to flip the rack ears on the case because the back of the case ran into the rack itself. After doing so it will likely mount. (Waiting on right angle power cable)Ver másVer menos
• D

  DonM

  16 de diciembre de 2025

  Nice little rack for the money!

  This is a nice little rack for the money! I found it to be exactly what I needed and for the price, its great! It was very easy to put together and then mount on a wall. It has plenty of space to mount the rack items I needed to install and the included hardware made it a breeze! When I ordered, I was concerned about how well it would support what I wanted to mount, but with a network switch, power strip, rack mounted router and a shelf installed it is very sturdy and I have no regrets in buying this for this project. It's great!Ver másVer menos
• A

  Aleksandr Konev

  Great Rack Frame

  The equipment is very convenient to maintain, easy to assemble, and easy to mount. Everything is great.