KESPEN Window Privacy Film One Way Static Cling Tint, Black, 17.5InX6.5Ft | Reflective Sun Heat Blocking Daytime Privacy Anti UV Window Tint for Home Office

Salida a tu país: 13-20 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

• J

  J Mckee

  Keep it wet and the bubbles will eventually suck down.

  I love this film. Not so easy to put up by yourself the first time. Keep it really wet! I put it up and that I did a bad job because there were some air bubbles in there. I put it up on a Thursday. I walked into the house Friday and noticed it was considerably cooler. Excellent heat and light blocking. I checked the windows on Saturday on all the bubbles were gone. They had all sucked down and it looks like it was professionally installed. Great product and is on all my windows now. 👍Ver másVer menos

  27 personas la encontraron útil

• D

  D

  Work very well for not being a professional install

  These were not that hard to install, if you follow instructions and take your time they can look very good. My pictures show during daytime you cannot see inside, and you can see outside with minimal visual distortion. I did not take night pictures, but at night you can see inside. The only downside to these is that looking from inside to the outside at night seemed very poor.This is what I found to work best for install.If you have plenty of material left over after cutting out what you need, use some of the excess to practice with.1. Get a good squeegee - I got this one EHDIS Small Squeegee 5 inch Rubber Window Tint Squeegee for Car, Glass, Mirror, Shower, Auto,Windows2. Thoroughly clean your windows. Don't just wipe them down, clean them. Clean them a few times.3. Measure the glass you want to cover, then add at least a half inch to each edge. So if your window is 20" wide, you want at least 21" of material or more.4. Cut your material to the amount you just figured out.5. Make a spray bottle of soapy water. Don't go crazy with the soap, just a drop or two is plenty.6. Spray your window so that every inch is wet and the water is dripping down - you cannot get it too wet.7. Peel the plastic protective sheet off the film.8. Spray the cling side of the film (the same side that had the protective plastic) with your soapy water.9. Give another couple sprays to the window, especially the top edge if your water has dripped down.10. Place the film onto the window so that the edges overlap the window. The film will automatically cling to the window and some of the soapy water will go away. You can adjust the position of the film as necessary to get the edges overlapping.11. Use the squeegee ONLY in a small section of the center of the window - DO NOT wipe to the edges. This will help the film stay in place while you cut it to fit. You do not want to squeegee to the edges because you still need the soapy water to help the edges stick after you get the film trimmed to size.12. Use a sharp hobby/exacto knife to cut the film. Push the film down so that it gets as far into the corner of the glass and the frame as possible. I found it easier to start from the middle and work my way into the corners. Go VERY SLOW! A nice slow cut will help you cut straight. I also found it helpfull to cut an entire sliver off, and not just to the corner of the window.13. Once you have it completely trimmed, use the squeegee starting from the center of the window and work your way to the outside edges. Do it multiple times, even if it looks like the soapy water is gone.14. If you have any edges that are not sticking, gently pull the edge back far enough that you can spray more soapy water in there, then use the squeegee again.Ver másVer menos

  1.542 personas la encontraron útil

• A

  anonymous

  8 de julio de 2026

  TAKE YOUR TIME!

  This stuff definitely works to reduce heat coming into a room. I took about 90 minutes to carefully measure and cut the film for one window, the kind that slides open from the bottom. It was complicated by my having a window air conditioner in the way. However, from the moment I test fit the pieces, it was evident the UV rays were being reduced significantly.Installation isn't too difficult, as long as you use a LOT of water. You think you have enough? Add about twice again as much. You want this sucker slippery! I started out with about 3/4" - 1" extra material. Be very aware of what the film is doing as you test fit it. It can sneak out of placement, but by carefully moving it into position, it stays put. After it is stuck in place, and you squeegee out as much water as you can, then trim with the razor blades. They are SHARP!Careful when you are sizing and cutting, because the film will crease. I wiped my interior windows down four times with glass cleaner, first with microfiber towels, and then with a squeegee and I still have some dust and strings.Overall it seems a decent product. I am knocking off one star because it is not as easy as it seems to install.Ver másVer menos

  26 personas la encontraron útil

• M

  Mzunderstood

  21 de junio de 2026

  Game Changer

  Worked GREAT for my needs. The sliding glass doors let a ton of sun in all afternoon. It creates a tremendous amount of heat. Even with ac on it felt hot. Less than $60 bucks solved that problem. There was a slight learning curve for installation. I wish I could do it over but it is going to be good enough. My recommendation is to go slowly when trimming to fit. If you happen to have a right angle ruler use it. The box it comes in was also helpful for a straight edge. For the length I used the dining table, pulled the amount I wanted to trim off the edge, and then used the table edge to control my razor. Should have done this with the end as well. If it looks bubbly and weird just keep working it. Push the bubbles to the edge and the water seeps out. I held a towel so I could wipe up all seepage. As the water dries between the window and the film it will look better and better. You definitely want to trim the edges so they are not right against the frame. If you don’t you can’t get the water out. I’ve had no problem with adhesion. One side was slipping a little but as the water dried that stopped. The spray bottle it comes with will give you carpal tunnel from the amount of pumps you’d have to administer. Use any other spray bottle. I’m going to fill the little spray bottles with eyeglass cleaner and put it in my purse. The little squeegee that comes with it is very helpful. The room feels so much cooler now. There’s no glare. The view is unobstructed and looks more colorful (like wearing polarized sunglasses). I’m so thrilled. I’d been using paper black out shades to keep it cool but that looked bad and completely blocked the view. Plus raising and lowering when I wanted to use the patio door (which is pretty constant most of the year) was a pain in the butt. That problem is solved. I want to do my windows on the front the the daytime mirror effect is a bit much for that and the directions say it can’t be used on double pane windows. Don’t know why. The directions say to spray both sides of the window. That clearly is not factual bc anything above the first floor would be off limits. Just spray the side of the glass the film that will touch and the side of the film that will touch the glass. Finally, use something heavy to hold down the corners when you are cutting the film but once you take the protective plastic off and spray the film with water it won’t curl anymore.
• M

  Moni

  It works great

  This product has worked for me for years. It blocks sunlight and adds privacy. You can see in the photos the difference between the 3 windows that are covered, and the 1 window not done yet. I was able to put it up easily by myself on 36x32 inch window panes. As one other reviewer mentioned, some of the air/water bubbles will ease out on their own after a few days; give it some time and smooth out again. Also, I’ve been able to take down and move sections to new windows no problem. There is a tiny but effective squidge and water bottle inside the cardboard tube…be sure to check for it.Ver másVer menos
• R

  R. Simpson

  BEST BANG FOR YOUR BUCK WINDOW TINT

  Well, I just want to say this stuff is fantastic. It's super thick vinyl, not like the cheap crap you get for your car. It also reflects light pretty dang good. If you look at my pictures, there is one where you can see the blinds on the left. That is the only window I couldn't complete on my whole house (in pictures) with the 35.4" x 32.8' roll. However, if you look closely, it is also the only one that you can see the blinds through. That alone should tell you this crap works. I live in an area that gets to about 200*F on a cool winter afternoon, and the front of my house heats up like a smelting furnace. My power bill, is, well, astronimcal. And that is just so I can wake up in the morning without wet sweaty sheets. My kitchen, in the afternoon, is like he*l's inferno, and Satan himself would be asking to go back home if he had to stand in front of one of the windows. LUCKILY, after installing these on the first window in my kitchen, it instantly felt about 10 degrees cooler. I couldn't feel the sun beating through anymore. By the way, I have 2" thick vinyl blinds on every window, and they only help so much. Anyway, after finishing the front of the house, I came home the next afternoon and my house felt MUCH cooler, so I did the back of the house. My bedroom no longer gets sunlight in the morning to wake me up through the blinds, and I love it. I totally recommend.Now, to the good stuff. I have never used tint before, so know this:1. Buy a window tint kit. Make sure you get one with a straight edge razor, a squeegee with the cloth wrapping, and a regular window squeegee. I purchased this one for 10 buckaroos: https://www.amazon.com/dp/B01J3QVS2K?psc=1&ref=ppx_yo2ov_dt_b_product_details2. Buy a metal meter stick from harbor freight or walmart, because you will need it to measure your cuts as well as to use as a guide for cutting. Also, buy a medium sharpee to mark the areas as well. When I made my cuts, I set it down on a flat hard substrate that I didn't mind gouging, and I set the meter stick to the marks I made and sliced down the meter stick, using it as a guide.3. It is better to cut your squares a little big than a little small. You can always use a ruler or a squeegee to mash the tint to the edge of the window, and run a razor down the crease. If you are cutting excess out in the window frame, which you will most likely do, I used a metal ruler to guide my razor, because it is virtually impossible to keep a straight line if you do not use a straight object as a guide to run your razor down.4. The directions show a bottle for soapy water. Throw the directions out. I found that a big a$$ mixing bowl with a 50/50 dawn dish soap and water solution works just great after screwing around with my first two windows. I used a micro fiber cloth, wet the window generously with my dawn solution, and then stuck my tint to it. Then if the tint doesn't slide easy, as in no effort used, then take it off, and reapply a generous amount of solution. That will do the trick, as now the tint is already soapy, and now the window is now soapy.**** Did I mention you need your glass spotless? Cuz' you do. If you don't, your little cat or dog hairs or boogers will show up under the tint. Use the soapy solution you make, and scrub with a micro fiber, and then use the squeegee you buy to swipe the window clean!!!6. Once you tint is in place, ALWAYS WET THE BACK OF IT GENEROUSLY, because this stuff will stretch and contort and malform itself. If you keep the back of it slippery, your squegee will move easily without scratching it or stretching it.7. Do not press hard. Use light pressure, as you will scratch it or stretch it.5. DO NOT USE A HEAT GUN YOU DO NOT NEED IT DO NOT USE A HEAT GUN YOU WILL DESTROY YOUR VINYL. ASK ME HOW I KNOW.6. Once you have it squeegeed into place, you can start cutting the excess millimeters off to make it fit correctly. USE YOUR RULER AS A GUIDE!!!!7. You need some small gaps in order for the soapy water and air to escape, so even a small amount of gap between the window frame and tint doesn't matter. It still blocks light just as good.8. Once you are down, you can wipe 'er down. Come back in a few hours, and you will be able to see where all bubbles are that you missed. In my case, it was the next day, and they don't look like bubbles as much as baby swirls, which is water trapped under. I just made another batch of dawn solution, wiped down the back of tint with it, and squeegeed the rest of the bubbles out!9. Enjoy your nice dark and cool area!That's my review of this, as I reallly appreciate how well it seems to be working. I'm excited to see how much my power bill drops, because even if it's only 10 bucks a month, this stuff pays for itself in less than a year. I'll be back to update.UPDATE: My first power bill was down $60. 2 months of that in the summer pays for all of the materials. The house has been noticeably cooler as well.