USX Mount Full Motion TV Wall Mount for Most 42-90 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6

$52.24

Entrega garantizadaEn stock

Salida a tu país: 14-21 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

Sobre este producto

Product Includes: The articulating mount Comes with bubble level, 3 pieces pack of cable ties and all standard mounting hardware, friendly US-based customer service. However, Concrete Anchors are not provided (If you need 10X50mm concrete anchors, please contact us to get it which be sent from USA). Saving Space: This heavy duty mount can pull out to 16.49 and retract back to 2.40”, which save some valuable space for you and make your house look neat and Max weight 132lbs. Easy To Installation: Tilt mount with detailed instruction and all included hardware in pre-labeled bags. In particular, if your stud is for 16'' wood studs, please screw the bolts into the outermost edge of the holes on both side wall plates of the bracket to ensure compatibility with 16'' wood studs. Adjustable View Comfortable : This TV bracket with dual articulating arms includes +5° /-15° tilt, ±45°swivel( maximum swivel angle depends on your TV). Want to more swivel angle? Please search for XML035 for the best options. +/-3° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room. Universal Design: This full motion TV mount fits for most of 42-90 inch TVs up to 132lbs with VESA size 200*100mm to 600*400mm available and max 16" Wood Stud space. Not perfect fit your TV? Please contact us and we'll do our best to solve the problem for you! If you need the screw M8*50, please message us to get it which be sent from USA.

Marca

USX MOUNT

Modelo

B07CXF452P

Categoría aduanal

Electronics

Vine & Dandy

7 de junio de 2024

Go for the the USX mount, perfect!

I have to say, this was one of the most well-thought-out products I've ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there's no fishing around for the right part. For the record, I used this to mount a 65" TV that weighs about 50 lbs. It is definitely sturdy and can hold much more.Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE).Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible - particularly if you're mounting a heavy TV. There's just no getting around that. Use the "stud-finder" to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don't bother with the one that you're supposed to stick on the template, just use the big plastic one. You're going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You'll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it.Once you've drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don't over-tighten or you'll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you're just going to have to use common sense. Don't over-tighten these screws either, but the brackets need to be snug.Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn't move when you're trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it's much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you're done!!!Operation of the mount is very smooth, though it takes just a little bit more effort than I'd like. I attribute that to the fact that it's brand new and I'm certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It's a little pricier than most, but worth every penny.Read less