About The Details
Easy to assemble and works as expected
Karcher K1700 pressure washer: Assembly is very easy -- wheels and handle. If you just use the supplied hose then screw it on to the outlet and onto the spray nozzle. Screw the garden hose adapter on and screw a garden hose on. Plug it in and it should work, mine did.I bought a Karcher because a review by Pan the Organizer who said his Karcher K5 lasted 10 years and still works but it was time to get a new pressure washer. As I recall he thought Karcher had a superior pump. I watched a couple reviews of the K-1700 as well. So, as I had no idea and the K-1700 seemed what I was looking for, I bought it. I have light work -- a small cement patio, some siding and vehicles. Note that the high-pressure fittings are M22-14 not M22-15 as many electric pressure washers use so I ended up ordering another set. I knew the foam cannon used M22-14 when I bought it. I didn't see any reference to the fittings in the Karcher manual or brochure. I did see that some Karcher products fit the K2 or K5 but not the K-1700 but was left to assume why. I guess Karcher wants us to buy their brand.I added some quick disconnect fittings. I had a leak on the appliance end of the pressure hose. It seemed the o-ring on the hose is too large and was pushed down when I inserted/screwed the quick disconnect on. I took an o-ring off another fitting and the same thing happened. I then added a garden hose washer to the supplied pressure hose fitting after cutting it down so it fit and replaced the o-ring with a piece of Teflon packing "string" which fit into the o-ring groove perfectly. I used silicon grease to get it to stay put. No leaks. I was testing with a car wash foam cannon which worked very well and produced a persistent snow foam coating.The pressure hose went onto the pressure washer without any leaks. The garden hose adapter leaked some, but I didn't tighten with a wrench which I'll do next time.I ordered another quick connect set for the high pressure fitting on the K-1700 and a couple different sets of o-rings to have on-hand.The electric cord wraps nicely on the supplied handle arms.CONS:1. Nozzle storage is limited to two regular nozzles and one hybrid rotating type nozzle (as supplied). So, I don't have a place to put other nozzles except in a bag in the storage box.2. No built-in good way to keep the supplied pressure hose coiled neatly on the unit. The hose is a little stiff and making it fit in the storage box may not work well or conveniently and being slick plastic will likely push out.I added a piece of PVC pipe that went through the handle and that keeps the pressure hose coiled up around the handle and the storage bin. I'll fit it with some closed cell foam to keep it in place as I want to be able to remove it.My initial impression is that I think the supplied hose will work for me but time will tell if a longer, more flexible hose will be needed. The K1700 seems like a good unit overall particularly for the price. I cannot see paying lots for something I don't expect to use that often.Winter storage: per the manual, be sure to run it out of water. It seems that water runs out when I tilt it to the inlet fitting but the manual said to run it until just out of water. I think I can handle that.Ver másVer menos
128 personas la encontraron útil
















