BDK PolyPro Seat Covers Full Set in Beige on Black – Front and Rear Split Bench Seat Covers for Cars, Easy to Install , Car Accessories for Auto Trucks Van SUV

Salida a tu país: 18-25 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

• D

  Dorothea Sease

  24 de agosto de 2026

  I was disappointed

  They didn't fit.

  3 personas la encontraron útil

• C

  Christian

  5 de noviembre de 2024

  Can't go wrong for the price

  When you have kids even the slightest bit of extra protection for the seats is useful. I knew these wouldn't be super high quality because of the price, but honestly I was surprised, in a good way, with how good these were. Since they're universal, you have to cut holes, stretch, push, adjust until it fits your seat. For $25 that's worth it. My 2024 Kona has a driver power seat so the velcro strap wouldn't work. For the front passenger seat there were too many metal bars underneath the seat to use the velcro strap and I wans't worried it may rip it. Even then it fit pretty snug after I make some adjustments. Cutting a small hole for the seatbelts helps keep the covers in place on the edges. In the back seat I was able to put the bottom cover on with no issues, but was not able to put the back cover on. The back cover requires you to be able to pull the cover in the crease where the bottom of the seat and the back of the seat meet, which is nearly impossible in the new Konas. Not to mention there are car seat hooks in the back so it would require over a dozen holes to be cut in that cover alone. So, it wasn't worth the trouble and I was more concerned with the bottom cover. No issues at all with the headrest covers.A small gripe is the material that it's made of. Any clothing that rubs against it makes a "sandpaper-ish" sound that is louder than against the regular seat material (in my car at least). Just a personal ick, but again, this was purchased for the protection not for high qualtiy material.It looks great and matches the rest of the car so it blends in well. This is only Day 1 with the covers installed so I will update if I find any other tips or gripes throughout my use.Ver másVer menos

  41 personas la encontraron útil

• J

  Jess Gutowski

  8 de mayo de 2026

  They're ok

  Are they an exact fit for my 2018 Chevy traverse? Not really, but close enough. The second row is captains chairs and while it says they'll fit, they won't fit well when there's an arm rest. I really had to fight to adjust them. They also don't stay in place when the seat is folded down to access the 3rd row. The foam piece that is placed between the seat and back comes out every time. While these were only for the 2nd and 3rd row, there was 6 head rest covers. That was unexpected. Was able to cover the driver and front passenger seat headrests as well, so kind of a plus. As for the 3rd row? Lol I got the seat cover on. Mostly. Since it's not really used much and folded down, I didn't bother with the clips. It will not stay in place when folded down without them. I'm not very confident they will stay put or not get really stretched with them on either. As for the back part, I didn't get very far with that. They should've put headrest holes like the captains chairs but they didn't. You have to cut holes for the headrests(if you can get the headrests off. I don't believe mine do. They just fold down) and the seat belt buckles for the seat cover too... They're lightly padded but don't expect them protect your seats from anything other than dust and light dirt. I got the black and grey. The color looks pretty close to advertised, maybe a little lighter. Are they great quality? Not really. They were cheap and will work well enough though.Ver másVer menos

  11 personas la encontraron útil

• A

  Amazon Customer

  Easy to install, love the color, works for Hyundai Kona 23

  These fit for a Hyundai Kona '23 pretty well! Be careful when you put on your seats. One of the head rest covers tore slightly when placing on, but I just fixed with some needle and thread. You have to cut holes for the seat belts and the head rests in the back. They're not "perfect" but they are decent enough for universal covers and match the price point in terms of quality. I'm going to continue to use.I found them easier to put on my seats than previous universal seat covers I bought, so it didn't take long to get them in my car.For my Hyundai Kona, the head rest cover for the middle seat in the back - it is quite loose on the head rest but again, for me they work for what's intended : protecting my seats and giving my car a little personality (I got the purple covers)Ver másVer menos

  26 personas la encontraron útil

• V

  Verfied Purchase

  Doesn't adequately fit Subaru Forester

  Bought these for a 2016 Subaru Forester because Amazon allowed the seller to claim they fitted this make and model. It's high time Amazon start clamping down on shysters making claims that products fit certain makes and models of car because, by even the most liberal use of the word, these do not "fit" this make and model. After a couple of hours I was able to MacGyver these into place, but to say they fit is stretching it. (While we're on the subject of stretching it, beware!)Ok, the front and passenger seat covers are straightforward slipovers. They don't really cover the seats adequately (see above picture) but are passable given the price. Be careful when trying to pull the covers into place; some of the seam joins looked as though they might not take much pulling which is why I settled on the above.For the rear seat, ah yes, this is where the fun and games begin! The only way I was able to get this even close to fitting was to remove the seat bed from the chassis. You'll need to release a pair of front seat clips at the lower front edge of the seat bed, and then reach down the back of the seat bed, between the bed and the back, while tilting the seat bed backward to release two metal hooks; there is one on each end of the seat bed. Subaru might have a diagram on their site to illustrate this maneuver. If you haven't done it previously, a helper might make it easier although it can be done alone.Cover the seat bed with the cloth cover and use the small wire hooks on the elastic loops to fasten the cover onto the seat bed. Here is a helpful hint: the first time I did this, I covered the seat bed, joined the hooks and then replaced the seat bed. When replacing the seat bed, several of the hooks came apart and I ended up starting over. So, to avoid this frustrating situation, I used a pair of long-nosed pliers to bend the hooks around each other (see above picture.) I considered using small cable ties which might be a good alternative. Also, be careful when stretching the elastic loops. Some of the stitching holding them on to the cover is very weak; several pulled away (yes, tore off completely!) during this fitting process (see above picture.)Once the seat bed is back in place with the cover attached, I noticed a major design flaw. The seatbelt locks were completely covered and could only be exposed by stretching the rear edge of the seat cover forward, thus exposing the rear edge of the seat (sea above picture.) Slits for the seat belt locks may have prevented this.The rear back was probably the least well "fitting" part of all. What the designers didn't know or take into account was the lower trim of the rear side of the Forester's seat. This severely limits how and where the elastic loops can be poked through. The "fit" was also quite loose for this seat back even after tightening up the mass of entangled elastic loops and hooks that covered the rear side of seat back. The upper edge did not allow for the uprights of the headrests and there was no cover that fit the smaller, center head rest.Overall, the materials and workmanship are poor, the design is poor. Not catastrophically poor -- it's possible to get them to sort of fit -- just poor. Is this justifiably countered with remarks like "What do you expect for $30 on Amazon"?
• M

  marissa l

  15 de agosto de 2026

  They’ve lasted almost a year and still look great

  I’m really happy with this car seat cover! It’s a great way to give the interior of my car a fresh, updated look while also helping protect the original seat from everyday wear and tear. The material feels durable and well-made, and I really like the overall appearance once it’s installed.The cover fits nicely and gives the seat a cleaner, more finished look. It’s also helpful for protecting against spills, dirt, crumbs, and general messes that can happen with everyday use. I appreciate having that extra layer of protection, especially when I want to keep my car looking nice.The design is cute without being too much, and it adds a little personality to the interior. Installation was fairly simple, and once it was in place, it stayed where I wanted it without constantly shifting around.Overall, I’m very pleased with this seat cover. It looks good, feels durable, and does a great job of adding protection while giving the inside of my car a more stylish appearance. Definitely a nice upgrade for the price, and I would recommend it to anyone looking to protect and refresh their car seats!Ver másVer menos

  4 personas la encontraron útil