Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

MasterPieces Accessories, Jigsaw Puzzle Glue Bottle with Spreader Built into Cap, 4 Ounces 4oz with Spreader | Envi

gasman
9 de marzo de 2023
Easy to use
Used this for a 1000 piece puzzle. It’s a little thick, but was easy to spread. Puzzle looks great after the glue dried. Used about half the bottle. We recommend it!
Tim Meyers
17 de mayo de 2020
Easy to use and very strong
Easy to apply- no warping or curling. I misread description and assumed I was getting a big spreader. Unfortunately, the spreader built into this size bottle is the size of a rubber cement brush, I found it awkward to try spreading such a large area with such a tiny spreader. I had an expired drivers license laying around that I used and it worked beautifully. I was able to cover two puzzles, front side only, at 18x24 inches each with about 1/4 of a bottle left. This only needs to be applied VERY thinly. Think of it more as mortar for the individual pieces and less of a protective varnish (though it will completely seal the surface). To achieve this, weather you use an old card or the included spreader, you can apply quite a bit of pressure as you squeegee it across to get a very thin layer and also press glue into cracks. I did this and puzzles are strong enough to flap but it didn’t leak through. Once I let it set for a few minutes, I ran all the way over puzzles again in columns top to bottom and scraped excess glue back into bottle. My first puzzle took a few hours to dry because I didn’t scrape it as thin as the second one. The second one was very nearly dry in an hour. If I had done my first one as thin as my second, I am confident I would have enough to do a third 18x24 Inch Puzzle. The instructions recommend applying a layer to back of puzzle for extra strength, but I feel this is unnecessary if you apply top layer properly and are planning on framing. If you are planning on simply pinning to wall like a poster, you may want to do back. For what it’s worth- I used this on “linen-finish” puzzles and the texture still shows through. Instructions were very vague on bottle. If you have never used this type of thing, you may want to look at a tutorial first just to see the process.Ver másVer menos
5 personas la encontraron útil
J Alexandra Hooper
28 de mayo de 2020
Nice glue
Nice glue. You definitely need an additional spreader to smooth and spread this glue, as the applicator is too small to accomplish the job before the glue dries. Read all suggestions by other users before using.
T. A. Lenz
9 de marzo de 2022
This is far superior to other puzzle glues I've used.
Other glues I've used tend to warp the puzzle. This stuff doesn't warp at all. Plus, even it it's applied a bit unevenly, the surface looks great when it dries.
1 persona la encontró útil
Anne R. Bonifacio
26 de febrero de 2021
Just what I’m looking for
I use this type of glue for every assembled puzzle that I want to frame. It works perfectly!
1 persona la encontró útil
Deborah L.
29 de julio de 2026
Glue spreader
Didn’t like the spreader in the jar. Too narrow.

Ver más reseñas

Otras opciones

MasterPieces Accessories, Jigsaw Puzzle Glue Bottle with Spreader Built into Cap, 4 Ounces 4oz with Spreader

Sobre este producto

Reseñas

Easy to use

Easy to use and very strong

Nice glue

This is far superior to other puzzle glues I've used.

Just what I’m looking for

Glue spreader