Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

Water Sensor Alarm, Smart Water Leak Detector for Home & Basements | Made in THE USA | Automatic Flood Detectors and Water Alarm, Pure Water Capable (WaterWatcher) | Envi

Otras opciones

StyleWater Watcher

Detalle de producto

$102.89

HydroCheckVendido por Amazon · enviado por EnviPrime gratisEnvío gratis

Water Sensor Alarm, Smart Water Leak Detector for Home & Basements | Made in THE USA | Automatic Flood Detectors and Water Alarm, Pure Water Capable (WaterWatcher)

4,7306 reseñas

$102.89

Entrega garantizadaEn stock

Salida a tu país: 18-25 de Septiembre del 2026

Para comprar en web necesitás verificación en dos pasos activa. Te la pedimos una sola vez.

Sobre este producto

5-YEAR WARRANTY & EXCEPTIONAL CUSTOMER SUPPORT: We stand behind the quality of our product with a 5-year warranty and our friendly and knowledgeable customer support team is ready to assist you with any product or installation queries. VERSATILE COMPATIBILITY: From dehumidifiers, aquariums, hydroponics, washing machines, well pumps, and more! HydroCheck WaterWatcher works flawlessly with a variety of appliances, ensuring comprehensive water leak detection. MANUAL RESET FOR ADDED SAFETY: Once WaterWatcher detects water, it keeps appliances off until manually reset. This intelligent feature stops issues in their tracks, letting you address them without delay. ENHANCED SENSOR FOR PRECISE DETECTION: Our new and improved sensor pinpoints the smallest water traces, making it the ideal companion for dehumidifiers. Catch even the tiniest leaks to prevent further leakage and potential harm. PREVENT MAJOR FLOODING & WATER DAMAGE: The only leak-detecting product that sounds an alarm when water is detected and turns off the appliance automatically. Say goodbye to costly water-related disasters by preventing flooding and water damage with our water leak detectors for homes.

Marca: HydroCheck
Modelo: B00988NOV2
Categoría aduanal: Tools & Home Improvement

Reseñas

4,7

306 reseñas

13 con comentario

558%
439%
33%
20%
1

Buysgoodstuff
17 de diciembre de 2025
Water damage can be bad, esp if you don’t know it is happening. Solved!
Compact sensor, not only alerts with 85 db alarm but also shuts off my dehumifier. I use a dehumidifer in the attic above my clothes closet (yes you can guess my problem). The dehumidifer did its duty, overflowed and ran down from the unfinished attic into my closet. 7 suits, numerous shirts, some Sheetrock damaged and corner tape required fixing. Found this alarm/shut off switch on Amazon. Am working right now to test a catch basin that houses the dehumidifier so if an overflow occurs it sonically notifies us while turning off the dehumidifier. So far all the “mock-ups” have worked, water in the catch basin sets off the alarm as well as turns off the dehumidifer long before there is enough water to cause damage. The alarm sets off at 0.2 inches of water in a 5 inch deep catch basin. Plenty of leeway. Easy to install, connects to a single electric receptical. Pretty loud alarm, don’t know if I really need that because of the automatic shutoff.Ver másVer menos
Craig
A "void your warranty" review!
First, this does exactly what I need it to do. My washing machine drains into a tub that then needs to pump up a few feet to the sewer outlet pipe. As such I use a fine screen lint filter in the tub to avoid anything getting trapped in the pump. If this screen clogs up early in a load of laundry then during the final rinse and spin the tub could overflow. I've already had to mop up the basement a few times for this reason. This is the only product I have found that can sense for this spilled water and shut off power to the washer so it stops pumping out to the tub. In my tests it does exactly that. A bit pricey in my opinion for what it does, but if it saves me from needing anything more than a simple towel to clean up a tub overflow then I'll take it.There are some cons which I can live with. These have already been cited in other reviews: the smooth teardrop shape that can be difficult to grasp, the bulky size, the question of since when powered the relay is always on (this does allow for it to fail safe) will that reduce the life of the relay, and the need to remove power in order to reset the unit. As was noted in Roland Petit's answer to the question about shutting off or silencing the alarm, someone with a little electronics skill can bodge together a "reset" switch.Roland describes putting a switch on the transformer which I'm not a fan of as then you are dealing with a mod on the AC side of the circuit, something riskier than is necessary. I opened my unit to inspect it and found the logic us using an Atmel ATTINY44A microcontroller chip. Pin 4 of this chip is a reset that if brought low (grounded) will reset the chip. Conveniently there is a pinheader socket right nearby and two of the through holes are for reset and ground, conveniently both right next to each other. This is probably used for QA testing at the manufacturing plant. Wiring a momentary switch between these easily accessible solder points will provide you a much safer way to reset the unit, providing your mounting of the switch is well spaced away from the AC components. I've already done a workbench test of this and confirmed easy reset of the unit with these contact points. If I find a momentary switch that I feel I can mount acceptably then I will likely install that mod at that time. This unit has a 5-year warranty and it is minimal effort for me to unplug to reset, so I'm not in any rush to add this mod. THIS MOD SHOULD ONLY BE DONE BY PEOPLE WITH REASONABLE ELECTRONICS SKILL! FAILURE TO INSTALL PROPERLY COULD RESULT IN INJURY OR DEATH! NO QUESTION THAT THIS MOD WILL VOID YOUR WARRANTY! It is disappointing that for the price STAK Enterprises didn't have a reset switch already included as a part of the design.Another con that I found when I opened it up is that there didn't seem to be any strain relief in the main unit beyond the flex boot on the wire going to the sense puck. A good yank of the wire could pull it off the mainboard. Given the ample length of cable provided for the puck this probably isn't much of a worry, but while I had it open I still put a knot in the wire inside the housing that will take the stress if the wire gets pulled.One final note to keep in mind with the puck is that the two post contacts closest to where the wire enters the puck are the sense posts. The post that is opposite where the wire enters is just for making a 3rd leg to level the puck. I doubt it will really matter for anyone but if for some reason you want to sense for water directionally then have it facing with the exiting wire pointing towards the direction that you want detected first.Ver másVer menos
47 personas la encontraron útil
Xbox Gamertag
20 de diciembre de 2025
A must-have for your washing machine!
I recently repaired my washing machine and had little confidence about how well the repair would hold up, so I wanted an alarm to let me know if there were any leaks.This device does it all:1. It has a sensor you place on the ground that detects water. It needs to be on a flat surface. It will detect water if the entire surface area below the sensor is wet, but it doesn't have to be a lot of water. Placing the sensor in a pan and dumping a cup of water in was enough to set the alarm off, so it is sensitive but won't falsely trigger. Think of it as a "puddle detector".Note if there is water near the sensor, but not under it, it won't trigger. So place it where you think water will most likely pool up.2. It will sound an alarm that is loud, but not "wake the neighbors" loud until you push a button on the side to cancel the alarm.3. It also TURNS OFF THE POWER to the device plugged into it! So for a washing machine where the water valve solenoids have to be energized to let water flow, they will get shut off automatically and the water will stop. That's exactly what I wanted!I think the cable from the main unit to the sensor is a little flimsy but once you set this thing up you'll probably never touch it again, so it's fine.I don't know if the power outlet on it is UL compliant, but if you are concerned about that you can still use this detector with nothing plugged into the outlet. In that case it will sound the alarm but won't turn anything off.I have a lot more confidence running the washing machine when I am elsewhere in the house knowing this alarm is monitoring the water situation.Highly recommended!Ver másVer menos
1 persona la encontró útil
Scott
21 de junio de 2026
Good investment.
I bought this sensor roughly 2 years ago. Today it worked like a charm. We walked into the house from being outside and could hear this alarm going off. It was the sensor.
J. E. Evans
22 de abril de 2026
Installation required creativity
This product works well and was easy to install, except I had to cut the sensor wire to feed it to the dishwasher from the adjacent kitchen cabinet and then splice it back together. The product should be improved by adding a disconnect into the sensor wire.
1 persona la encontró útil
Paul Ashley
5 de julio de 2023
Decent if its what you're looking for
I'll first start off by saying my day job is an instrumentation and controls tech and 80$ is too much for this product. Should be more like 30-40$. That being said, this appears to be the only device on the market like this that will directly switch off a 120v source when water is detected. So if that's what you need, this product should work for you. Sadly after about a month and about 20 trip cycles (I was doing testing) the alarm now always goes into a trip one second after being plugged in. I tried cleaning the sensor in an ultrasonic bath, but no dice. I suspect the thin cable may have flexed itself apart internally due to my own movement of the sensor. I didn't continue to troubleshoot it as Amazon was willing to send a replacement as there is a 2yr warranty included. Thus why despite the device failing (safe) on me, I am still giving it 4 stars. If you get one of these, give it a check every now and again just like you would a fire alarm.For the techies: The sensor appears to be operating at a higher current than other resistive-contact-based water sensors I have seen, as when your hands are wet you can actually feel the current flow through the sensor's metal tabs. This should allow for higher accuracy of the sensing of water and reduce false high or low states as well it may work in distilled water.Ver másVer menos
16 personas la encontraron útil
C-Man
28 de noviembre de 2025
Excellent product I purchased two.
This device works excellent. I put this in a water tray to keep an eye out on a dehumidifier I put in my basement. I have a pump that pumps out the water from the condensation and if the pump goes bad, then it will turn off the dehumidifier. Excellent product.
BillyM
27 de noviembre de 2012
Good leak detector for dehumidifier
I searched for something like this for a while and contemplated making one of my own because I was having a hard time locating one. I eventually stumbled upon this one and decided to give it a shot. It works exactly as advertised! I use this device as a safety mechanism for a dehumidifier pump. My dehumidifier drains into a standard condensate removal pump. That pump then discharges the collected water up and out the washer machine drain pipe. All that works, and has worked, great for a long time. I started getting nervous that, if the pump ever failed, the dehumidifier would just keep draining away and I'd potentially have a huge mess on my hands. This device should alleviate that concern. What you do is plug the dehumidifier into this device, then place the sensor probe on the floor near the pump. If the pump were to fail, and spill water over onto the sensor, then the device would cut power to the dehumidifier and sound an audible alarm. The power would remain cut off, and the alarm sounding, until the sensor wall-pack was unplugged from the wall and then plugged in again.After setting up the device I tested it by pouring a little water on the floor. As the water moved towards the sensor contacts, the device immediately shut off the dehumidifier and sounded the alarm. I have to say I was surprised how little water it took to trigger the action.Unless it fails on me, I see no reason why to give this item anything other than five stars. I think it is a little pricier than it needs to be (probably should be about $50) but it does what I want. I may purchase another one for my second dehumidifier location.Ver másVer menos
5 personas la encontraron útil
Richard B.
28 de julio de 2022
Awesome little device!
Does what it's supposed to do. We had a sewer backup because our backwater valve was closed and the washing machine started it's drain cycle. Installed the sensor in our basement bathroom shower (our lowest point which is the first place water will come up) and ran the device to our laundry room. Tested it by starting the washing machine and pouring a glass of water by the sensor. Stopped the washing machine instantly! Wonderful device.Ver másVer menos
Ian Morrison
18 de octubre de 2025
Water sensor alarm
If you have a problem with septic and your washing machine ect is running then this item will save you a big mess by shutting down the item you plugged into it also the alarm is quite loud.
Robert Guindon
22 de diciembre de 2025
Great peace of mind.
This device works just as it was intendent. Like the added reset/mute button. I have installed on a 3/4 HP water pump. It gives me peace of mind knowing my basement won't flood if a pipe bursts or a connection fails.
Crane
21 de enero de 2024
Sécuritaire
Facile d'installation protection efficace