Enviar a

Nicaragua

Hola

Iniciar sesión

Carrito

Internal test

Rastrear paquete

Assistant

Descargá el app

LED Flash Strobe Controller Flasher Module | Envi

fixuwawa
19 de julio de 2026
Great product great for what they're made to be and they work well
These work great I use them for different projects with my RC vehicles! They're great for lights pre-wire in they remember the last code. If you're using an RC vehicle and your controller you have the availability to turn on different channels on and off these will work perfect for you you can wire them up to any lights put the pattern you would like and with the controller with the simple on off to that channel yes you will get what you want what you have previously set also you can put double stick tape bring them down to the bezel and drive the vehicle up to you with a quick touch you can switch the pattern! They do great I use them for many different things and I'm into a lot of electronics these two great for everything! They're bought for LED flashing strobe lights that's exactly what they do! And I have stress tested then these work very well I am very happy with them! I'm using them on RC vehicles that I call them bashers when I get done I am replacing parts! That's what a basher is and you bash it you replace the parts and you go back to bashing! Now then there's your babies you don't bash them! These work well on both! But they take the bashingVer másVer menos
IMMACK.
3 de julio de 2026
Do not buy
None of the four that I ordered worked.
Derrick Aquino
18 de mayo de 2026
Small and simple LED controller with many options.
I added this to my Ghostbusters proton pack n-filter to strobe the LED quickly. It works perfectly and remebers the last mode setting.
Judy
14 de noviembre de 2024
Retains settings when power-cycled.
Easy to operate. I was pleased to find that it retains the last setting when power is removed. This should be advertised.
1 persona la encontró útil
Guy
26 de mayo de 2024
Works Perfectly
Integrated this into a custom lighting solution for outdoor applications.Worked perfectly at 12V, with numerous strobe and intensity options.Zero issues, definitely recommend.Came here to write this review after seeing negative reviews and poor star rating.No clue what they were doing, but for my 12V LED strip use (roughly 20W power consumption) this worked perfectly!Ver másVer menos
terry flowers
13 de abril de 2026
Doesn't work as stated.
These do not work as stated. They dim only slightly, barely visible. Not good.
John
27 de marzo de 2024
Variety of patterns
I’ll be using this to control an emergency light on the rear of a motorcycle. Seems to work reliably. Nice that there are separate switches to control the flash patterns and the speed at which the light flashes.
1 persona la encontró útil
Timothy Watts
17 de enero de 2024
Homemade Flashing/strobe setup--- FAIL
*****UPDATE*****After I installed these I noticed that one of them were starting to melt the plastic cover on the flasker controller. as it would turn out 2 of the 4 have failed before I had a chance to actually use them for more than 5 min. after replacing the burnt one with the spare I recharged the line with 12V DC and i had another one get super hot(burned my Fingers) and start to melt before i was able to disconnect it. So at this point in time I had 2 fail and 2 more i dont think i want to trust it for running for the length of the parade. now i know your may say i was trying to run too much on one flasher but you would be wrong, because i has 1 LED light which used less the 2 amps. one light per flasher. so I would like to make sure you check into your application on whether these will benefit you or become a problem in the long runI hope this helps you in making your decision....*****UPDATE*****I ordered these to create a new feature for my VW buggy which i ride in several parades during the Mardi Gras season. of which I always try to make my buggy stand out. This year with the help of this product and couple of other amazon products by WINBANG and Ezauto, I am able to add the piece-de-resistance. ( I will add pictures when i have received/installed everything) with this strobe controller, an LED Light fixture (WINBANG 4 Inch LED Light Pod), and some colored films (EzAuto Headlight Taillights Vinyl Tint), I have made a purple gold and green strobe effect around my buggy giving it a look of the Mardi Gras Lead. Like Paul Revere but I will be stating the Parade is coming! with a blinking Purple Green and Gold strobing lights no0 one will be able to say "I didn't see him coming. cant wait to get this installed and working!!!Ver másVer menos
2 personas la encontraron útil
A. Flynn
4 de mayo de 2025
A very inexpensive, simple, and effective LED controller.
These worked perfectly for me and are quite inexpensive. I wanted something that would allow me to set a single LED bulb to a slow pulse and that is exactly what this little controller unit did. The controls are easy and intuitive and allow you to change both the effect and the speed. They apparently work just as well with LED strips as well as with multiple voltage inputs, but I only used 12V for a single LED. I do have 3 more to play with and a couple orphan LED strip remnants, so I foresee some experimentation in my future.Ver másVer menos

LED Flash Strobe Controller Flasher Module

Sobre este producto

Reseñas

Great product great for what they're made to be and they work well

Do not buy

Small and simple LED controller with many options.

Retains settings when power-cycled.

Works Perfectly

Doesn't work as stated.

Variety of patterns

Homemade Flashing/strobe setup--- FAIL

A very inexpensive, simple, and effective LED controller.

También te puede interesar

También te puede interesar